cup holder
 

Hi fellow Cherokee affictionatos I am new to the site and have been lurking for awhile. I have seen several ideas you guys have had for cup holders and here is my solution to not having cup holders in my 1992 Cherokee Laredo. I on;y got this photo on the post, but have others in my album. Still learing how to do the post and attach pics.

i dont have the cupholder problem but thats bad ***!

thats pretty cool. im considering doing this 2 now. nice work

Clever idea. Not a bad use of ingenuity!

I got a old piece of aluminum diamond plate and used a cardboard template of the console and used an angle grinder to cut it out. I then boleted teh hinge and cup holder on it. This baby will hold (2) 44 oz cups without a problem.

do you have more pics on that?:thumbsup:

Dig it! Very cool

looks cool...but my only issue would be if you need the e brake in an emergency....youre SOL

Very clever, I went this route

http://i15.photobucket.com/albums/a3...iggs3/cup1.jpg

info info info lol u cant teaze me with that rockstar and the set up with out a how to and what you used sheet

Me likey lol nice setup, think bout doing this now...but how did u do urs?

why dont u just do this haha


here is a picture of it installed

http://cgi.ebay.com/ebaymotors/12035...#ht_1687wt_879

I took a piece of 3" tubing 2" long and capped the bottom. I then took a 2 and 15/16 hole saw drilled down as deep as the hole saw would allow. Took a die grinder for the lateral cut to finish removing the plastic. I then debured the plastic and reinstalled the console. I used a slightly smaller holesaw than the dia. Of tubing to make for a very tight fit.

http://i15.photobucket.com/albums/a3...iggs3/cup3.jpg

http://i15.photobucket.com/albums/a3...iggs3/cup4.jpg

http://i15.photobucket.com/albums/a3...iggs3/cup2.jpg

because very few cups fit in there. i have that too. and pretty much only 12oz. cans and small drinks fit in there.

more pics