Another Rear Bumper
 

Finished my wrap-around rear bumper the other day. The bumper is 2.5 X 3.5" .25" wall tube. The mounts are 2.5 X 2.5" .25" wall angle and .25" stock. The D-shackle tabs are .75" stock. All the other misc parts are also .25" stock. It will be held on by eight, 10mm bolts for the stock mounting and an additional nine, 1/2" grade 8 bolts through the frame rail. The design of this bumper was largely inspired by HS00XJ's rear bumper. At this point it is primed and painted and should be going on later tonight or tomorrow.
Attachment 237297
Attachment 237298
Attachment 237299
Attachment 237300
Attachment 237301

Very nice! Looks awesome and well made. Looks pretty darn solid as well.

very nice bro ! Cant wait to see it on there.

Thanks guys, can't wait to get it on either!

Got it installed. Didn't have the camera with me so I just have this cell pic. I'll take some better ones tomorrow.
Attachment 237362

That looks great! I like the piece you added on the bottom. Kinda unique.

Thanks :icon_smile:

Here's some better pics
Attachment 237408
Attachment 237409
Attachment 237410

Attachment 237411
Attachment 237412
Attachment 237413

That, my friend, is beautiful.

Haha Thanks! Probably won't be pretty for long... :whistling2:

Did you gusset the angles and under the skirt?i landed on my skirt hard one day and i feel the gussets helped it hold up.

I only gusseted the mounts. Didn't on the skirt. We'll see what happens. Easy to fix if it bends :icon_cheesygrin:

What paint did you use? I used rustoleum self etching primer and hammered finish black and mines chipping up pretty bad ill just recoat with some black. looks good bro.

Nice work! You should go into production with those..