Another bumper build.
Thread Starter
Newbie
Joined: Dec 2009
Posts: 20
Likes: 0
From: Texas
Year: 1999
Model: Cherokee
Engine: 4.0L straight six
Thanks everyone. Yea that goat is a horrible pest!
I would not recommend buying a bumper unless it is really cheap or you just cant build stuff.
I would not recommend buying a bumper unless it is really cheap or you just cant build stuff.
Junior Member
Joined: Jun 2010
Posts: 84
Likes: 0
From: Ozawkie
Year: 1992
Model: Cherokee
Engine: 4.0
VERY nice its almost exactly what i was thinking, except for a few little changes... MAJOR props because this 18 year old (me) can not weld that good!.... oh but i am not so sure about the Ford banner in the background of the picture... its all about the jeeps
Senior Member
Joined: May 2010
Posts: 824
Likes: 0
From: North Carolina
Year: 2000
Model: Cherokee
Engine: inline 6 4.0 lt
Thanks for all the nice comments. i figured many people would not have liked it and said it was overkill. i know it is a little...
Here are some pictures that are a little blurry but they show how i did it.
i will post pics of the underneath tomorow. while uploading the pictures i noticed on my mounting plates the bolt holes are actually further back.
Here are some pictures that are a little blurry but they show how i did it.
i will post pics of the underneath tomorow. while uploading the pictures i noticed on my mounting plates the bolt holes are actually further back.
Thread Starter
Newbie
Joined: Dec 2009
Posts: 20
Likes: 0
From: Texas
Year: 1999
Model: Cherokee
Engine: 4.0L straight six
I figured many people wouldnt like it cause it is kinda heavy and thick metal and a cherokee is a light weight vehicle. i will take some pictures and post them.