Ok so im not having any luck coming across any good round tubing and if i did, same situation with use of a bender. Soo.... been thinking on building me some sliders out of all square tubing.. Some 2"x2", anyone built any out of all square? if so show some pics! Not gonna copy anyone just lookin for a few more ideas.

I think that just about everyone does. Look at the pics on JCR's website, but I'm sure someone here will post some too.

If you end up with a set I want to see um,I think square would look good.

I think it would be a lot easier to make them out of square (no bending), then do round to tie them to your bumpers via fenders if you want.

If I remember correctly, I think COSXJFAN has 2x2 angle iron welded to the bottom of his rockers.

thats what i was thinking about doing... i found some 2x6in channel on craigslist one day for next to nothing... now i cant find it to go buy it... lol

This is more like im talking about, i relize most of the rock slider structures are square but the part that angles up and runs about flush with the bottoms of the doors are bout all round... like below....



This here is more like what im gonna build..... except the ends are gonna be right opposite..

pretty beef...

I made mine out of square, and rec. tube. I didn't bring them up tho, there just flat. I may bring them up in the future, but for now there fine. I don't like them sticking out to far any way. They tend to grab things when they do. (sorry the pix are so bad, I need a real camera!)

Dooooo itttt!

Heck i could make mine stick out a foot and wouldnt get caught on nothing lol considering i got 10" wide wheels and 14.50 boggers. No i wouldnt do that.. i just wanted to get a few idears, i like the cuttin the rocker out and doin like how you done, the sliders on the grand look good as well, though im not gonna go as far as to cut my rockers out. Hell theres no tellin how ill do it once i lay everything out and start arc' and spark'n.

i really like these sliders i had thought about doing this to mine but i only got one ? how did he get the jeep that clean before he started mine almost never looks that clean in the fender wells

im doing exactly this on my mj....a little different after the cab though

You can see the rest of the build here: https://www.cherokeeforum.com/f46/fr...mily-xj-27619/

I suggest you call the local fab shop/metal supplier and find out what it costs to buy a stick. Keep in mind most sticks come in 20'-22' lenghts. The local metal supplier my way charges a 1 to make cuts, so I have them cut my stuff to lengths, and yes they will cut on angles. Just cheaper and faster that way.

Last time I bought any rectangle tubing it was 2x4x3/16 and it was 175 for a 22' stick. Yeah it has been a few yrs since I needed a stick of tubing