$6 cup holders
Seasoned Member
Joined: May 2011
Posts: 358
Likes: 1
From: idaho falls, idaho
Year: 97
Model: Cherokee
Engine: 4.0
thes mod is realy cool and functional i am going to do this but i'm changing it up by the looks of the cup holders you used they have drain holes in the bottom of them i found some with a nipple on the botom you can atack a hose to to let the sweat off the drinks drain out botom of jeep instead of in the console pocket like these http://cgi.ebay.com/ebaymotors/White...Q5fAccessories
how well did the whole saw go through did it give you any trouble?
Junior Member
Joined: May 2011
Posts: 95
Likes: 3
From: columbiana, alabama
Year: 1995 xj sport
Model: Cherokee
Engine: 4.0 ho
here's mine i used a 3-1/2 hole saw but had to trim a little but it has a tight fit.. i'm getting some clear vinyl tubing to attach to the nipple on the bottom drilling a couple of holes in floor of jeep and bottom of console so the moisture off drinks will drain out of jeep
Last edited by SLNPARTS1; Jul 9, 2011 at 09:00 PM.
Thread Starter
Junior Member
Joined: Feb 2011
Posts: 85
Likes: 0
From: south mo.
Year: 1990
Model: Cherokee
Engine: 4.0
very nice! i think mine were 3.5 in holes too. they make them in all colors and even chrome. they are the best mod ive ever added. most used anyway.
Newbie
Joined: Oct 2011
Posts: 11
Likes: 0
From: New Mexico
Year: 1994 stock w/148k mis.
Model: Cherokee
Engine: 4.0L
No cup holders=worst design flaw ever!
I mean what was Jeep thinking ! I thot they must have made them illegal for a few years or something! lol. At least you didn't spill sev dozen coffees on your seats so the int pics look good. Mine isnt so photogenic! nice job! Jeep would have hired you back in 94!
Member
Joined: Nov 2011
Posts: 176
Likes: 3
From: pennsylvania
Year: 96
Model: Cherokee
Engine: 4.0
i think they all came with a cup holder they clip in on the passenger side of the shifter base but the clips usually get broken thats what happened in mine. i think im gonna have to try that method
Senior Member
Joined: Apr 2010
Posts: 720
Likes: 1
From: Marshall, WI
Year: 1994
Model: Cherokee
Engine: 4.0L i6
here's mine i used a 3-1/2 hole saw but had to trim a little but it has a tight fit.. i'm getting some clear vinyl tubing to attach to the nipple on the bottom drilling a couple of holes in floor of jeep and bottom of console so the moisture off drinks will drain out of jeep