DaddyGreenGenes-->Richmond VA

1998 Cherokee Limited. 4.0L, AW4, NP242, D30+C8.25

Wheels/Tires:
-32x11.5x15 Procomp MT's on 15x8 MT II's. 2 full size spares
-Bushwacker Flares+fender trimming

Suspension:
-4.5" RC x-series w/ LCA drop brackets and full leaf packs
-RC heavy duty tie-rod w/ ZJ TRE's
-All Polyurethane mounts (Daystar Master bushing kit)
-Polyurethane Engine and Transmission Mounts
-28mm swaybar (stock but uncommon)
-RC swaybar quick disconnects
-Stainless Steel brake lines

Drivetrain:
-Tom Woods SYE and DriveShaft
-All Royal Purple Fluids

Steering:
-AGR Superbox 2, AGR Superpump

Engine/Exhaust Mods:
-Rebuilt Engine
-703 Injectors
-Accel Tune-Up Kit
-Magnaflow Cat+Catback system
-Borla Header (soon to be ceramic coated)
-Mean Green Alternator
-Optima Yellow Top

Cooling System Mods:
-FFD Extreme Triple Threat Radiator+Fan Kit (+supplemental relays)
-Flowkooler Water Pump
-High flow themostat housing and 180 degree themostat
-Runcool Hood Louver Kit

Front Axle: HP Dana 30, 3.55 open
-ZJ ball joints, new knuckles and hubs
-Billet axle tube seals
-Upgraded U-joints
-SSBC brake upgrade

Rear Axle: C8.25 Corporate, 3.55 gears
-Limited Slip(stock)
-Tom Woods Gold Seal U-joints
-New Drum Brakes

Armor/Recovery:
-Custom 4x4 Fab Front Winch Bumper w/ Brushguard
-Custom 4x4 Fab Rear Bumper w/ tire carrier
-Promark Silverback 8k winch
-Stock engine, trans, and gas tank skids
-Class 3/4 Hitch

Interior:
-Leather, All power
-JVC touchscreen CD/DVD/MP3 head unit
-Cobra 75 WXST CB w/ 4ft Firestik
-Fan Kit Override switches (Override on, and override off)
-coming soon 30mm ammo can for storage

Misc:
-Paint (white to green)
-all new A/C compressor, drier/accumulator
-All new transmission/cooling/power steering hoses
-Roof rack soon to be installed

 

Shane 87

1993 Jeep Cherokee
Engine
4.0 straight 6
Tranny
AW4 auto
T-case
NP-242
Front axle
Stock Dana 30 3.55 gears sway bar disconnected
Rear axle
Stock Dana 35 3.55 gears factory worn out lsd no sway bar
Suspension
Front
Budget boost pucks not sure the size but i think about 2in
Rear
lift shackle and add-a-leaf i think about 3in
Tires
31x10.5x15 BFG KM Mud Terrains
Interior
Hurculined floor and roof cobra 19 cb
Power windows and locks
Exterior
Magnetic mount cb antenna
Surco roof rack
Rattle can paint job
Lots of trail damage
Factory stuff
Factory skid plates
up country package
column shift
Factory rear tire carrier
factory tinted glass

 

2000 cherokee sport
stock 4.0 (190k)
aw4.
np231 with short advance adapters SYE
Tattons rear driveshaft
Dana 30 front with Nitro 4.88's, aussie locker, balistic control arm mounts
Chrysler 8.25 29 spline rear. Nitro 4.88's Aussie locker

Front, rubicon express 4.5" springs
rustys shocks
custom long arms, 1.750 .250 wall dom lowers, poly axle ends, ruffstuff heims on the x-member side.
dom uppers with heims
zj steering
rustys broken trackbar welded back together.
front axle set 1.5" forward.

Rear rustys 6.5" leaf packs. (sagged to about 5.5") soon to have 2 leafs removed and jks shackles added.
rustys shocks.

35" KM2's on black d-windows.
cut front fenders
cut and folded rears. (above oinch seam and folded under inner fender.)

I think thats it.

 

not sure if its been a year yet.

1999 4.0 (BBK throttle body, MSD wires, Rustys throttle body spacer, Spectra filter, Flowmaster 50 series, Brown Dog mounts, Optima yellow top) AW4, NP231 w/ AA sye and Novak shifter/linkage, BDS tc skid, Quigleys rear driveshaft, Shortened front shaft with Spicer u joints.

Steering:
1.50" DOM, 7/8" Ruff Stuff heims, Parts Mike hi steer arm, Waggy pitman arm, PSC steering box, PSC hyrdo assist ram, JCR steering box spacer, steering box brace, 1.5" DOM track bar with Ruff Stuff 3/4" heims, Clayton track bar bracket

Suspension:
Clayton 6.5" coils, RE 4.5" Leafs (made in usa), RE 1.25" shackle, Liquid Iron relocation brackets, BDS 4 link, Ruff Stuff traction bar (2" dom lower, 1.5" dom upper, 1/4" axle plates 4" shackle, 7/8 heim), bilstein 7100s in front and bilstein 5100s in rear w/ hoop.

Front Axle:
78 F250 HP44, flat top knuckles, RCV shafts, full spool, Warn lockouts with RCV 300m upgrades, 4:88 gears, T&T truss and bracket kit, Ruff Stuff diff cover, Spicer HD balljoints.

Rear axle:
FF60, chromolly 35 spline shafts, disc brake conversion, Ruff Stuff u bolts and plates, full spool, 4:88 gears, Ruff Stuff diff cover.

Armor
JCR stage III sliders, ORS Stubby Winch Bumper (not pictured), Roxolid rear bumper, XRC 10 winch with synthetic line and Draken fairlead, raised gas tank w/ skid.

Wheels/Tires
5- 15x8 3.5bs Pro Comp Rockcrawler steel wheels w/ 37x12.50 Goodyear MTRs

 

We had so many submissions this month I could only accept the first five.
Sorry guys! Get them in early next month.



Let the voting begin!!!

Edit: Only 4 contestants now! One has withdrawn.

 

Awww man didn't make it this month

 

Figures right after I post mine, i add a new front bumper and winch, and redid the springs and shackles. ok well. Good group!

 

You were #6 out of 10 submissions. Just resubmit soon.

 

Had to vote for Royal, full widths.

Oh yeah, and it's clean.

Some good looking rigs this month though.

 

Oh well at least it gives me time to get better pictures. GL ALL!

 

Yea last time we had more than 5 entries it made things a little more complicated lol

 

Voted!

 

Another vote for RoyalXJ.Got to support the NAC ! Jeep is looking awsome Bob, been following the build thread on NAXA.

 

RoyalXJ got my vote. been watching your build awesome jeep man

 

love a clean and mean looking xj ct67 72