Going for July COTM

I have a 91
Engine is a Renix out of a 90 (thanks Cruiser and Flintstone)
Trans is the AW4 with cooler
Transfer case is a 231 with a SYE and some drive shaft
Front axle has a Detroit tru trac, 456 gears, IRO truss and the Yukon unlocking hub kit.
Rear axle is a 44 with a IRO truss, 456 gears, pinion skid from I think a YJ and a power trax locker.
Thy both ride under Rubicon express 4.5 springs.
Bilstiens all the way around.
ACOS spacers on the front.
Serious Off Road steering UTK. Got almost all OTK parts just waiting on trac bar parts to come in the mail from Ruff stuff.
Have Ruff stuff frame stiffners ready to go in with all the metal to make my own rocker sliders/OBA tanks.
AC compressor converted to OBA
Serious Off Road long arms. NICE PRODUCT
Gas tank skid
Engine skid
33.12.5-15 KM2s.


Parts on hand.
Brush guard front bumper
Warn VR 8000 winch
HD shackle relocations. Installed
Pro comp extreme MTs
Frame stiffeners
2x6 metal for rockers

 

-Year
1992

- Model
Cherokee Laredo

-Specs
4.0L HO
2wd
D35 open
AW4
Stock suspension

-Mods
Trimmed fenders
Flare delete
Carpet delete
4300k HID headlights
Recovery points front and rear
Bedlined quarters
Bumper endcaps deleted
31x10.50r15s on TJ Moabs
Hitch
Brown Dog Motor Mounts
CB and antenna
Yakima roof crossbars
Dick Cepek Headlight grilles
Custom A/C floorboards
Couple other odds n ends
The rest is a mess

-Future Mods
Tuff Country 3.5" lift (Tuff Country only 'cause I already have it)
4wd AW4 (technically already have it, just need to go pick it up)
NP242 (hopefully)
HP D30 front end
29 spl 8.25 rear
Flowmaster Super40 muffler
Cowl intake
Chassis saver and monstalined floors

Pics are from different phases of the "build" - the low-pro street tires were what was on it when I got it.








255/60r15, stock susp, rear sway delete









235/75r15, stock susp, rear sway delete







235/75r15, stock susp, rear sway delete, front sway disco, fenders trimmed










31x10,5r15, stock susp, fenders trimmed - how it sits at the moment

 

I'd like to submit for the July Cherokee of the Month.

Name - Jack
Location- Fort Worth, TX

Build

2000 Cherokee Sport
4.0L
Expediton/Overland build
4.5" Rubicon Express
Bilstein 5100 shocks
32" BFG M/Ts on Rubicon 10A wheels
ARB Front Bumper
Warn 8000lb winch
Smittybilt Rear bumper/tirecarrier
Lokka locker front Dana 30
Lokka locker rear Chrysler 8.25
Napier Precision hood vents
Cowl snorkel/intake
Limb Risers
Roof rack with surround LED light bars
ZJ leather seats swap
Cobra CB radio

 

92 2 Door
120K Original Miles

Engine and Drivetrain:
4.0L
Cone filter
703 Injectors
60mm Throttle Body
Aw4
Tranny cooler
NP231
SYE Kit

Suspension:
4.5" IRO Coils
3" Skyjacker leafs
2" Shackles
RC Shackle relocation brackets
Skyjacker Nitro Shocks

Front Axle:
79 Ford HP 44
4.88 gears
Spartan locker
Chromos
Yukon Super Joints
Converted to 8 Lug
Chevy knuckles out
Warn hubs
HD diff cover
69" WMS

Rear Axle:
73 Dodge W300 D60
4.88 gears
Welded
Chevy disk brake conversion
Ruff Stuff 2+ perches

Wheels and Tires:
Old Chevy aluminum mag wheels
-16.5x9.75 w/ 5" back spacing
38x15 TSL Radials

Steering:
7/8" hiem joints
1.5" .25" wall DOM
RE trackbar
RE trackbar bracket

Misc:
L&L front bumper
9k lb winch
Frame stiffeners
Gas tank skid
Dodge 3500 Master cylinder
Set of full and half doors
CB
97 XJ seats
Kicker Speakers
JVC Head unit
OHC
97 Center console
In cab winch controller

Currently at 106" wheelbase with a 21" belly clearance and 73.5" tall at the drip rails

I just finished the axle swap so no off-road pics yet but will happen soon

 

K, go.

Please remember that if you aren't prepared to supply hi-res photos you'll forfeit to the next guy.

 

It's certainly a tough call again, all potential winners.

 

I voted for bubba.

 

Voted! Good luck guys.

 

Nice Jeeps guys,,,Good luck!!!

 

Voted for the yellow. Good luck guys!

 

Voted - good luck guys!

 

voted!

 

Voted! Good Luck

 

The deed is done. Luck guys.

 

Had to vote for a fellow NC xj owner.