View Poll Results: COTM Winner
Foxmxrcer
14
34.15%
Mehoff_400
13
31.71%
Mattphillips90
8
19.51%
91WhiteXJ
3
7.32%
Adamk
3
7.32%
Voters: 41. You may not vote on this poll
January COTM Voting Thread
#1
CF Veteran
Thread Starter
Join Date: Dec 2009
Location: Newport, pa
Posts: 2,820
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
-97 Cherokar "the general"
-4.0, aw4, 231, port/polished head, 2.5"exhaust
-D44 front and rear, 4.88's, zip locker front, Spartan locker rear
-35x12.50 Hankook dynapro Mt's
-chopped, caged(not finished), boat sides, 3 link front suspension, 4.5"lift springs, 1.5"diameter chromoly steering and panhard bar with heim joints, low profile front bumper with hidden winch, and a bunch more stuff. I built almost everything.
-currently building a shaved 14 bolt and HP d60 to throw under it with coil overs and tubing the front end. Also building a 231/300doubler.
Attachment 262288
Attachment 262287
Attachment 262286
Attachment 262285
-4.0, aw4, 231, port/polished head, 2.5"exhaust
-D44 front and rear, 4.88's, zip locker front, Spartan locker rear
-35x12.50 Hankook dynapro Mt's
-chopped, caged(not finished), boat sides, 3 link front suspension, 4.5"lift springs, 1.5"diameter chromoly steering and panhard bar with heim joints, low profile front bumper with hidden winch, and a bunch more stuff. I built almost everything.
-currently building a shaved 14 bolt and HP d60 to throw under it with coil overs and tubing the front end. Also building a 231/300doubler.
Attachment 262288
Attachment 262287
Attachment 262286
Attachment 262285
Last edited by foxmxrcer; 01-22-2015 at 05:16 PM.
#2
Senior Member
Join Date: Sep 2007
Location: puyallup
Posts: 604
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0
January COTM Voting Thread
2001 XJ limited leather heated seats overhead console
155,000 miles 4.0L
auto NP 242 t-case hack n tap kit
Rear Chrysler 8.25 4.56's detroit locker
Front HP dana 30 4.56's RCV shafts yukon zip locker
5.5 rubicon lift with Clayton long arm upgrade bilstein shocks
33x12.50x15 Goodyear wrangler Kevlar
15" Ultra Badland wheels
JCR vanguard front bumper with smittybuilt X20-10K winch
vision X light bar and fog lights
dirtbound offroad front fender flares
onboard ARB compressor
THOR intake
XJ's~for~life 10" sub box
155,000 miles 4.0L
auto NP 242 t-case hack n tap kit
Rear Chrysler 8.25 4.56's detroit locker
Front HP dana 30 4.56's RCV shafts yukon zip locker
5.5 rubicon lift with Clayton long arm upgrade bilstein shocks
33x12.50x15 Goodyear wrangler Kevlar
15" Ultra Badland wheels
JCR vanguard front bumper with smittybuilt X20-10K winch
vision X light bar and fog lights
dirtbound offroad front fender flares
onboard ARB compressor
THOR intake
XJ's~for~life 10" sub box
#3
CF Veteran
Join Date: Feb 2012
Location: Boone, NC
Posts: 1,424
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L
Here's to my ugly ever changing jeep
Basics:
1998 XJ
4.0, AW4, NP231 HnT slip eliminator
Front:
HP Dana 30, HD control arm brackets, 4.88 gears
Custom true 3 link longarms
IRO crossover steering
HD Steering brace
JKS quick discos
6.5" lift
poly bumpstops
turrible RC track bar
crappy shocks
Rear:
Dana 44, disk brakes, Trash-Lock lim slip, 4.88 gears
FST shackle relocators
4.5" leafs, chevy drop shackles
Daystar poly leaf bushings
Poly bumpstops
ridiculous drive shaft angle
Bumpers:
Front custom stubby with tube to body
rear custom basic bumper
Misc:
those funny looking round headlights
broken winch
frame plating up front
35" km2's
removable doors with electric quick plugs
Engine Stuffs:
4 hole injectors
daystar poly motor mounts
Higher voltage alternator
Junkyard #6 piston
Stuff I have sitting around:
1 ton axles 05 f250 Dana 60/10.5 just need the time and money to build -_-
Rock Sliders, just need to weld mounts up for them
More tube
Homemade cowl snorkle thing
maybe some other random redneck stuff
Attachment 262601
Attachment 262602
Attachment 262603
Attachment 262604
Basics:
1998 XJ
4.0, AW4, NP231 HnT slip eliminator
Front:
HP Dana 30, HD control arm brackets, 4.88 gears
Custom true 3 link longarms
IRO crossover steering
HD Steering brace
JKS quick discos
6.5" lift
poly bumpstops
turrible RC track bar
crappy shocks
Rear:
Dana 44, disk brakes, Trash-Lock lim slip, 4.88 gears
FST shackle relocators
4.5" leafs, chevy drop shackles
Daystar poly leaf bushings
Poly bumpstops
ridiculous drive shaft angle
Bumpers:
Front custom stubby with tube to body
rear custom basic bumper
Misc:
those funny looking round headlights
broken winch
frame plating up front
35" km2's
removable doors with electric quick plugs
Engine Stuffs:
4 hole injectors
daystar poly motor mounts
Higher voltage alternator
Junkyard #6 piston
Stuff I have sitting around:
1 ton axles 05 f250 Dana 60/10.5 just need the time and money to build -_-
Rock Sliders, just need to weld mounts up for them
More tube
Homemade cowl snorkle thing
maybe some other random redneck stuff
Attachment 262601
Attachment 262602
Attachment 262603
Attachment 262604
#4
Senior Member
Join Date: Apr 2014
Location: las vegas, nv
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: I6 H.O, 99 manifold, APN header, neon injectors, cowl intake, screamin demon ignition system
1991 jeep Cherokee Laredo
Engine:
4.0 litre, New bench tested long block, cowl induction intake, 99+ intake manifold, 703 injectors
Drivetrain:
242 swapped for a 231, slip yoke eliminator, rear cv driveshaft, Ford 8.8 in the rear, 4.56 gears, Aussie locker, blue torch fab diff cover, iron rock off-road truss, Dana 30 front with iron rock off-road c gussets, riddler diff cover, 4.56 gears, ballistic fab truss
Interior:
8 point roll cage, beard racing bucket seats, nrg steering wheel hub and quick release, coin holder cut out with switch panel installed
Exterior:
OrFab quarter panel armor, custom roof rack, custom made swing away rear bumper, custom made stinger front bumper, custom rock sliders, trimmed fenders, rear cut and fold quarter panels, hood vents, 20" light bar in the grill, 4 hella spot beam lights, rigid led pod for reverse light
Suspension:
Iron rock off-road 6.5 front coils, rough country long arm upgrade with t-case skid, Rancho front shocks, bastard pack in the rear, rough country shackle relocation brackets, FOA shocks running through floor tied to cage
Misc:
Putco headlight harness, cobra cb, black grill, two tone paint, bedlined down the sides, hi lift Jack
Attachment 262931
Attachment 262932
Engine:
4.0 litre, New bench tested long block, cowl induction intake, 99+ intake manifold, 703 injectors
Drivetrain:
242 swapped for a 231, slip yoke eliminator, rear cv driveshaft, Ford 8.8 in the rear, 4.56 gears, Aussie locker, blue torch fab diff cover, iron rock off-road truss, Dana 30 front with iron rock off-road c gussets, riddler diff cover, 4.56 gears, ballistic fab truss
Interior:
8 point roll cage, beard racing bucket seats, nrg steering wheel hub and quick release, coin holder cut out with switch panel installed
Exterior:
OrFab quarter panel armor, custom roof rack, custom made swing away rear bumper, custom made stinger front bumper, custom rock sliders, trimmed fenders, rear cut and fold quarter panels, hood vents, 20" light bar in the grill, 4 hella spot beam lights, rigid led pod for reverse light
Suspension:
Iron rock off-road 6.5 front coils, rough country long arm upgrade with t-case skid, Rancho front shocks, bastard pack in the rear, rough country shackle relocation brackets, FOA shocks running through floor tied to cage
Misc:
Putco headlight harness, cobra cb, black grill, two tone paint, bedlined down the sides, hi lift Jack
Attachment 262931
Attachment 262932
Last edited by 91WhiteXJ; 01-27-2015 at 11:29 AM.
#5
CF Veteran
Join Date: Aug 2010
Location: Greensboro
Posts: 1,220
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L
January COTM Voting Thread
1992 2 Door
116k Original Miles
Drivetrain:
4.0
60mm TB
703 injectors
2.5" Cat back exhaust
AW4
Tranny Cooler
231
SYE
Exterior:
Half doors
Roof bars
Interior:
97+ seats
Front speakers relocated to kick panels
Kicker speakers everywhere(front, dash, soundbar, sub)
Custom cubby sub box
JVC head unit
97+ center console
OHC with switch panel
Cobra 19
Removed rear seat
Front:
D30
SS brake lines
4.5" IRO Coils
2" spacers
Skyjacker Steering Stabilizer
RC quick disconnects
Rustys shocks
RE track bar and mount
Rocker Krawler 3 link
ZJ tierod
C-rok steering spacer
Durango Box
Rear:
D44 from 89 stock
3.5" Skyjacker Leafs
2" shackles
SS brake line
RC Shackle Relocation
Wheels and Tires:
15x8 Cragar V5
33x12.5 BFG A/T
Recovery/Protection:
L&L Front bumper
9000lb winch w/ in cab controller
Factory front skid
Rusty's TC skid
Stock tank skid
Randoms:
Headlight harness upgrade
Custom CB antenna mount
Tinited turn and tail lights
Factory hitch
116k Original Miles
Drivetrain:
4.0
60mm TB
703 injectors
2.5" Cat back exhaust
AW4
Tranny Cooler
231
SYE
Exterior:
Half doors
Roof bars
Interior:
97+ seats
Front speakers relocated to kick panels
Kicker speakers everywhere(front, dash, soundbar, sub)
Custom cubby sub box
JVC head unit
97+ center console
OHC with switch panel
Cobra 19
Removed rear seat
Front:
D30
SS brake lines
4.5" IRO Coils
2" spacers
Skyjacker Steering Stabilizer
RC quick disconnects
Rustys shocks
RE track bar and mount
Rocker Krawler 3 link
ZJ tierod
C-rok steering spacer
Durango Box
Rear:
D44 from 89 stock
3.5" Skyjacker Leafs
2" shackles
SS brake line
RC Shackle Relocation
Wheels and Tires:
15x8 Cragar V5
33x12.5 BFG A/T
Recovery/Protection:
L&L Front bumper
9000lb winch w/ in cab controller
Factory front skid
Rusty's TC skid
Stock tank skid
Randoms:
Headlight harness upgrade
Custom CB antenna mount
Tinited turn and tail lights
Factory hitch
#6
Junior Member
January COTM Voting Thread
Guys, please remember that when this is over I will REQUIRE that high resolution/good quality photos be sent to me to go in the Calendar. Please be prepared to do so. If not, the runner up's entry will be used instead.
K, Go. VOTE!
K, Go. VOTE!
Trending Topics
#9
CF Veteran
Join Date: Aug 2010
Location: Greensboro
Posts: 1,220
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L
#15
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
-97 Cherokar "the general" -4.0, aw4, 231, port/polished head, 2.5"exhaust -D44 front and rear, 4.88's, zip locker front, Spartan locker rear -35x12.50 Hankook dynapro Mt's -chopped, caged(not finished), boat sides, 3 link front suspension, 4.5"lift springs, 1.5"diameter chromoly steering and panhard bar with heim joints, low profile front bumper with hidden winch, and a bunch more stuff. I built almost everything. -currently building a shaved 14 bolt and HP d60 to throw under it with coil overs and tubing the front end. Also building a 231/300doubler.