View Poll Results: January COTM:
jmaxj
45
49.45%
nitro450exp
46
50.55%
Voters: 91. You may not vote on this poll
January COTM Poll:
01-25-2011, 05:10 PM
#1
Do you hear banjos?
Thread Starter
January COTM Poll:
jmaxj:
91 kind of
4.0HO out of a 95/aw4 that hates being upside down/231 that is now cut in half
front axle- D44 w/chromemoly axleshafts ctm u joints and chryo treated R&P, 4.88 gears and ARB
rear- metric ton w/ 4.88 gears and ARB
front suspension-4.5" deaver coils with custom 3 link w/panhard, fox 2.0 emulsion res. shocks custom valved.
rear suspension-4" rockcrawler leafs, 14" travel bilstein 5150's mounted to
a custom shock hoop behind the back seat.
15x10 steel wheels w/ beadlocks wrapped with 35" maxxis creepy crawlers that need to wear out so i can get 40's
mods it has right now- RADesigns rockshifter setback w/railshifter, custom front and rear bumpers and sliders, tactor lights cause the headlights fell out, 6 point roll cage and not a straight body panel.
mods that it's in the process of getting- 4 link rear with air shocks, backend cutoff and tubed out so i can hit it on rocks, 231/300 doubler, extremely high boatsides, more tube thrown at cage, corbeau baja ss seats, custom center console, fuel tank relocated up into cargo area and alot more, won't all be completed til about april.
i'm sure there's more just can never remember everything about it.
----------------------------------------------------------------------------------------------------------------------------------------------------
nitro450exp:
1994 4.0 2 Door Sport 4wd. ( Original owner )
White, 4.0 litre, 5 Spd.
PS: "Custom" - means I designed and made myself, in most cases.
Specs:
Engine:
Stock 4.0
Custom 2.5" exhaust.
K&N filter on custom intake.
Trans / Transfer Case:
Stock AX-15
Tera 4.0 231 J with 2 Lo.
Slip yoke eliminator ( Tera )
Custom shafts large U joints.
Axle:
Narrowed Dana 44 rear with Ford Explorer disc brakes. ( 3.73:1 ) 30 spline Moser's
Rubicon Dana 44 / 30 front. ( 3.73:1 ) 30 spline inners 19 outers.
Detroit EZ locker Rear.
Powertrax front.
Suspension:
Tera Long arm front lowers, tera uppers. 6" springs.
Custom upper brackets.
Custom Rear Triangulated 4 link coil conversion. 6"
Tera lower arms and coils. ( TJ )
Wheels and Tires:
Rock monster internal inner and outer Bead locks 15 x 8, 5 x 4.5.
Swamper SSR Radial 35 x 10.5 x 15.
Other:
Tera High steer knuckle, 1 Ton ball joints and Al Tie rod.
Full interior cage.
Custom front bumper and Warn 8274.
Custom rocker skids.
Custom rear bumper and quarter panel trim and guards.
Custom rear swing down tire carrier.
Custom Half doors and removeable windows.
Custom Hood Vents ( VW Microbus )
CB.
Front and rear fender trimming. ( lots )
Rusty's crossmember and TC skid.
Rusty's front flares.
Truck catalog rubber rear flares.
JKS track bar and bracket. ( Rienforced and modified )
Custom steering bracket.
Onboard air ( Viaire 400P )
Thanks
Nitro
----------------------------------------------------------------------------------------------------------------------------------------------------
Congrats to the 2 members that entered properly!!
Best of luck guys!!
I'm sure there are a few of you wondering where your submission is....please read the rules/guidelines for COTM. Here is a hint...is has to do with the attached images you all used...or something like that. It seems pretty weak to get excluded for something so simple...help me out here guys!! I'd love to have a full roster for COTM!!
91 kind of
4.0HO out of a 95/aw4 that hates being upside down/231 that is now cut in half
front axle- D44 w/chromemoly axleshafts ctm u joints and chryo treated R&P, 4.88 gears and ARB
rear- metric ton w/ 4.88 gears and ARB
front suspension-4.5" deaver coils with custom 3 link w/panhard, fox 2.0 emulsion res. shocks custom valved.
rear suspension-4" rockcrawler leafs, 14" travel bilstein 5150's mounted to
a custom shock hoop behind the back seat.
15x10 steel wheels w/ beadlocks wrapped with 35" maxxis creepy crawlers that need to wear out so i can get 40's
mods it has right now- RADesigns rockshifter setback w/railshifter, custom front and rear bumpers and sliders, tactor lights cause the headlights fell out, 6 point roll cage and not a straight body panel.
mods that it's in the process of getting- 4 link rear with air shocks, backend cutoff and tubed out so i can hit it on rocks, 231/300 doubler, extremely high boatsides, more tube thrown at cage, corbeau baja ss seats, custom center console, fuel tank relocated up into cargo area and alot more, won't all be completed til about april.
i'm sure there's more just can never remember everything about it.
----------------------------------------------------------------------------------------------------------------------------------------------------
nitro450exp:
1994 4.0 2 Door Sport 4wd. ( Original owner )
White, 4.0 litre, 5 Spd.
PS: "Custom" - means I designed and made myself, in most cases.
Specs:
Engine:
Stock 4.0
Custom 2.5" exhaust.
K&N filter on custom intake.
Trans / Transfer Case:
Stock AX-15
Tera 4.0 231 J with 2 Lo.
Slip yoke eliminator ( Tera )
Custom shafts large U joints.
Axle:
Narrowed Dana 44 rear with Ford Explorer disc brakes. ( 3.73:1 ) 30 spline Moser's
Rubicon Dana 44 / 30 front. ( 3.73:1 ) 30 spline inners 19 outers.
Detroit EZ locker Rear.
Powertrax front.
Suspension:
Tera Long arm front lowers, tera uppers. 6" springs.
Custom upper brackets.
Custom Rear Triangulated 4 link coil conversion. 6"
Tera lower arms and coils. ( TJ )
Wheels and Tires:
Rock monster internal inner and outer Bead locks 15 x 8, 5 x 4.5.
Swamper SSR Radial 35 x 10.5 x 15.
Other:
Tera High steer knuckle, 1 Ton ball joints and Al Tie rod.
Full interior cage.
Custom front bumper and Warn 8274.
Custom rocker skids.
Custom rear bumper and quarter panel trim and guards.
Custom rear swing down tire carrier.
Custom Half doors and removeable windows.
Custom Hood Vents ( VW Microbus )
CB.
Front and rear fender trimming. ( lots )
Rusty's crossmember and TC skid.
Rusty's front flares.
Truck catalog rubber rear flares.
JKS track bar and bracket. ( Rienforced and modified )
Custom steering bracket.
Onboard air ( Viaire 400P )
Thanks
Nitro
----------------------------------------------------------------------------------------------------------------------------------------------------
Congrats to the 2 members that entered properly!!
Best of luck guys!!
I'm sure there are a few of you wondering where your submission is....please read the rules/guidelines for COTM. Here is a hint...is has to do with the attached images you all used...or something like that. It seems pretty weak to get excluded for something so simple...help me out here guys!! I'd love to have a full roster for COTM!!
01-25-2011, 10:03 PM
#7
CF Veteran
Join Date: Feb 2010
Location: Soddy Daisy TN
Posts: 5,420
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0L
You'd think only having 2 would make it easier. Hardest one for me yet. jmaxj you got my vote, barely. Nice to see rigs being used like they are supposed to.
