Congrats Russelmn! March 2010 COM winner!
#1
Congrats Russelmn! March 2010 COM winner!
russelmn
97 XJ, 4.0/AW4/231 SYE,
Bombproof Motor Mounts
4.5" RE coils
TNT Long arms
TNT frame stiffeners
Bastard leaf pack
14" RE shocks
33" KM2s
hp30/8.25 locked/4.56 gears
Cage
Half doors
Homebuilt bumpers
Warn 9000
12 Volt Guy winch control panel
AWShifter trans controller
ARB compressor w/tank
Fuel tank sunk into floor and covered/enclosed. Factory fill point
Hand grenade door handles
<90,000 miles, on it's side at least twice
97 XJ, 4.0/AW4/231 SYE,
Bombproof Motor Mounts
4.5" RE coils
TNT Long arms
TNT frame stiffeners
Bastard leaf pack
14" RE shocks
33" KM2s
hp30/8.25 locked/4.56 gears
Cage
Half doors
Homebuilt bumpers
Warn 9000
12 Volt Guy winch control panel
AWShifter trans controller
ARB compressor w/tank
Fuel tank sunk into floor and covered/enclosed. Factory fill point
Hand grenade door handles
<90,000 miles, on it's side at least twice
Trending Topics
#14
Whoa! Sorry guys, haven't been on here much lately! Thanks all!
89WhiteXJ, I didn't make the window canvas, a shop down in the cities did all the canvas work. I have a curtain to fill the hole in the back as well, but with my new shock mounts it won't work anymore.
Truthfully, I didn't do much of the work on this, I it already chopped up in trade for a tube buggy build I helped on. http://pirate4x4.com/forum/showthread.php?t=714553 click the link to see that build. I did the tube design and bending/fitting in exchange for this rig minus axles/tires/and a bunch of other parts. I built the bumpers, redid a bunch of the cage, slung some axles under it, found wheels and tires, replaced a bunch of parts he kept and started running it.
89WhiteXJ, I didn't make the window canvas, a shop down in the cities did all the canvas work. I have a curtain to fill the hole in the back as well, but with my new shock mounts it won't work anymore.
Truthfully, I didn't do much of the work on this, I it already chopped up in trade for a tube buggy build I helped on. http://pirate4x4.com/forum/showthread.php?t=714553 click the link to see that build. I did the tube design and bending/fitting in exchange for this rig minus axles/tires/and a bunch of other parts. I built the bumpers, redid a bunch of the cage, slung some axles under it, found wheels and tires, replaced a bunch of parts he kept and started running it.