Heard her fire for the first time! Had to start it with starter fluid, not getting any fuel.
|
Got a new mower today, 12.5 hp Briggs and Stratton on a murray. Needs a new float in the carb, but I can't find them.
|
3 Attachment(s)
Attachment 282115 Attachment 282116
And the mess in my garage from the new mower and the mower I haven't finished yet... Attachment 282117 |
2 Attachment(s)
Put a pump on the big mower today, but still couldn't get it to stay running for some reason, then it started getting icy out so we took the other mowers out to play, which resulted in more work for us.... Attachment 282140 Attachment 282141 One of the rear tires lost its bead in a mud hole.
Now I'm building a bumper for the front of the red murray. |
1 Attachment(s)
|
Anyone know how to keep the rim from spinning inside the tire?
|
Pulley swapped, locked, added bearings to the transaxle, did an oil change, and replaced the float on the red mower. Now it is really sketchy, really fast, and sucks at turning.
|
Originally Posted by SatiricalHen
(Post 3204555)
Anyone know how to keep the rim from spinning inside the tire?
|
Originally Posted by Veeb0rg
(Post 3206618)
beadlocks or rim screws - https://www.mickeythompsontires.com/...hp?bulletin=s4
|
1 Attachment(s)
Got me a new project to work on, 1970 Sears suburban 12
Attachment 283156 Thinking about just cleaning it up and putting on clear coat keeping the patina. Runs and rides, seems good so far, I'll modify the plan as I go. |
1 Attachment(s)
Did one of the fenders to test how the clear coat on the patina would look, and I think it's going to look awesome when I'm done.
Attachment 283196 Brings out so much more color, and it's so rich looking. |
Originally Posted by SatiricalHen
(Post 3206620)
won't rim screws make them leak air?
|
1 Attachment(s)
Thinking about getting a $50 harbor freight winch to put on the front of this mower. Just weld on a mounting plate and wire a switch into the dash. Then I'll rebuild the rear frame where I ripped the back off pulling logs.
Attachment 285836 |
1 Attachment(s)
|
1 Attachment(s)
|
All times are GMT -5. The time now is 03:59 PM. |
© 2024 MH Sub I, LLC dba Internet Brands