Higuys,


I’m very new here. work on lots of stuff from Harleys to a 59 AMC Rambler American.

YesterdayI worked on my 1995 Grand Cherokee limited 5.2 Automatic.

It was leaking from everywhere.

I put in a new front Pinion seal and it seems to be doing good. I also put in anew transmission output shaft seal and a input and output shaft seals on thetransfer case.

I was only able to take the jeep around the block last night. so its only got 1/2a mile on the new seals.

Thismorning I woke up and took a look under the jeep and I have a bigger than a basketballsize puddle of ATF.

All the seals went in good. The job was pretty strait forward any ideas on how somuch fluid is draining out?

 

So I never got a hand but I figure is someone else is in my shoes id give them the helping hand. Yesterday I took the Transfer case off again. the Transmission output shaft seal looked good I could not understand by it was leaking, but I pulled it off anyways and went to the jeep stealership and bought a new rear transmission seal. I did notice this seal had a little more meat on it. my prior seal a national did not have as much meat. this time when installing it I seated it a little farther into the transmission. what I call a c=unt hair more. put it all back together and wa la no more leaking. so I'm not sure if it was the oem seal or me seating this one a little deeper that fixed the problem. but no leaks and it feels good.