Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

XJ oil pressure and leak

Thread Tools
 
Search this Thread
 
Old Aug 4, 2009 | 12:38 PM
  #1  
XJ_Atheist's Avatar
Thread Starter
Member
 
Joined: Jul 2009
Posts: 123
Likes: 0
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Unhappy XJ oil pressure and leak

My 2000 XJ is having a couple problems....

The oil pressure is at about 50-60 when the car idles cold. As the car warms up the oil pressure gradually goes down, and it will idle at 10-ish... do you think the problem is the oil pump? or could it be bearings or gaskets..or crank seals?? there is also a small leak which i have a hunch is coming from the rear crank seal... when i did my last oil change i wiped down my oilpan because it was wet, and i checked under the truck today, and it is wet once again.


I know this is probably a repeat thread but I can never seem to find an answer to the infamous jeep oil pressure problem....


-Roger
Reply
Old Aug 4, 2009 | 01:15 PM
  #2  
XJ_Atheist's Avatar
Thread Starter
Member
 
Joined: Jul 2009
Posts: 123
Likes: 0
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Default

i just realized i posted this in the grand cherokee forum.... woops...
Reply
Old Aug 4, 2009 | 07:35 PM
  #3  
bbbngowc's Avatar
Member
 
Joined: Jun 2009
Posts: 115
Likes: 0
Model: Cherokee
Default

I'm not sure if it'll be the same, but I recently changed my Oil Pan and Oil Sending Unit. Everyone told me to start with the Oil Sending unit. Try that first.
Reply
Old Aug 4, 2009 | 08:06 PM
  #4  
XJ_Atheist's Avatar
Thread Starter
Member
 
Joined: Jul 2009
Posts: 123
Likes: 0
Year: 2000
Model: Cherokee
Engine: 4.0L I6
Default

Originally Posted by bbbngowc
I'm not sure if it'll be the same, but I recently changed my Oil Pan and Oil Sending Unit. Everyone told me to start with the Oil Sending unit. Try that first.
i forgot to mention that, i changed the sending unit because i too heard that is a common problem, people break them when changing oil filters quite often.... replaced it with no luck
Reply
Old Aug 5, 2009 | 04:43 PM
  #5  
bbbngowc's Avatar
Member
 
Joined: Jun 2009
Posts: 115
Likes: 0
Model: Cherokee
Default

I just saw a typo on my part. I recently changed my oil PUMP (not pan) and sending unit. If you're going to change the seals, why not the pump? Eliminate all possibilities. I was getting zero oil pressure from start up. Everything was changed.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
Jan 31, 2024 04:58 PM
nrwphoto
Modified XJ Cherokee Tech
42
Apr 1, 2022 07:49 AM
idahomike
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
84
Jun 17, 2016 07:39 AM
Pathfinder74
Introductions
12
Sep 16, 2015 04:43 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
Sep 13, 2015 06:06 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 12:00 AM.