unusual situation
#1
Newbie
Thread Starter
Join Date: May 2014
Location: phoenix
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2006 jeep laredo
Model: Cherokee
Engine: 3.7
unusual situation
current stats:
owner: ben,
age 29
hobbies: pases and party:
2006 yeep laredo- 3.7 4x2
I had recently taken my driver door panel in an effort to clean off some dried up soda.. and in the process of allowing it to air dry, i placed it on the roof of my yeep and went inside to cool down with a few brews (HOT arizona heat)…
2hrs later I had to run to meet up with some trim, and totally forgot about the door panel on the roof ( was too busy looking at the text pics ) and drove off.
Upon my first turn on to a busy street I heard the panel as it hit the street and another car running it over..
I went back and got it in all its 50 pieces and am trying to use all the good parts. windows were rolled down so since the harness pins are broken ive been dealing with 106 degree weather and not being able to roll them up.
there were some pins that were broken to a harness, I cant figure out the name of the part so any suggestions would be appreciated.
thanks!
Ben
owner: ben,
age 29
hobbies: pases and party:
2006 yeep laredo- 3.7 4x2
I had recently taken my driver door panel in an effort to clean off some dried up soda.. and in the process of allowing it to air dry, i placed it on the roof of my yeep and went inside to cool down with a few brews (HOT arizona heat)…
2hrs later I had to run to meet up with some trim, and totally forgot about the door panel on the roof ( was too busy looking at the text pics ) and drove off.
Upon my first turn on to a busy street I heard the panel as it hit the street and another car running it over..
I went back and got it in all its 50 pieces and am trying to use all the good parts. windows were rolled down so since the harness pins are broken ive been dealing with 106 degree weather and not being able to roll them up.
there were some pins that were broken to a harness, I cant figure out the name of the part so any suggestions would be appreciated.
thanks!
Ben
Last edited by bendaputhangkilla69; 05-28-2014 at 03:24 PM. Reason: make model
#3
Newbie
Thread Starter
Join Date: May 2014
Location: phoenix
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2006 jeep laredo
Model: Cherokee
Engine: 3.7
#4
Newbie
Join Date: May 2014
Location: University Park, IL
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2003
Model: Grand Cherokee
Dude, Big G JimmygG here to tell you that trim and booze will get ya every time!!!!
You should hit up my friend PeterB on here. He is a great tech and he'll know what to do. He is PeterB.
Peace Out Dudes
JimmygG
You should hit up my friend PeterB on here. He is a great tech and he'll know what to do. He is PeterB.
Peace Out Dudes
JimmygG
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Raney120
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
10-16-2015 11:27 AM
stimp774
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
28
10-01-2015 09:00 PM
ZombieResponseJeep
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
09-22-2015 08:45 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)