OK I have a 97 zj and I'm installing a 3 1/2 inch lift I have a set of 33s and wanting to know if anyone can tell me how much if any trimming I will have to do to get them to fit good also I'm running 2 inch spacers. Any help would be appreciated.

 

Front bumper end caps will need to be and the bottom/inside of the rear flares will need trimmed. The front flares on the rear section can be pushed back after trimming the fender for a almost factory look.

The 2 inch wheel spacers are what's gonna require more trimming of the flares.

•First pic shows how far back the fender is trimmed.
•Second pic shows the stock flares mounted and tell rear. section pulled back towards the door for more tire clearance
•Third pic is how the front bumper caps gets trimmed for tire clearance.