Thump sound on right front knuckle while turning steering wheel.
Thread Starter
Seasoned Member
Joined: Oct 2010
Posts: 299
Likes: 0
From: AnkaraTurkey
Year: 1997
Model: Grand Cherokee
Engine: 4.0
Dear friends, there is a newly developed problem/sound on 97 zj laredo.
when turning steering wheel from where ever it sits at that moment, wether car is stopping or moving, especially to left, fsuspension elements or just the right wheel knuckle makes "thump" sound. I also can feel it with my foot on the floor of car. It is faint but i can feel.
I checked all elements while a friend was turning steering wheel and car was shut off. It was still there. and definitely coming from right front wheel. It seemed coming from inside wheel, so i got close when i was lying under car, it makes a sound like a high tension steel plate released after removing tension on it instantly. We removed wheel and heard no sound when no load on that axle.what can be the reason? I really have no idea.
when turning steering wheel from where ever it sits at that moment, wether car is stopping or moving, especially to left, fsuspension elements or just the right wheel knuckle makes "thump" sound. I also can feel it with my foot on the floor of car. It is faint but i can feel.
I checked all elements while a friend was turning steering wheel and car was shut off. It was still there. and definitely coming from right front wheel. It seemed coming from inside wheel, so i got close when i was lying under car, it makes a sound like a high tension steel plate released after removing tension on it instantly. We removed wheel and heard no sound when no load on that axle.what can be the reason? I really have no idea.
Thread Starter
Seasoned Member
Joined: Oct 2010
Posts: 299
Likes: 0
From: AnkaraTurkey
Year: 1997
Model: Grand Cherokee
Engine: 4.0
when i was under the car, and when steering wheel was turned, sound can be heard close to front right wheel. Closest thing is track bar there.
Track bar bushing is new,it is red colored, prothane branded. But this sound developed recently. Two days ago. How can i understand if bushing is not good without removing it? Can there be another reason for this like steering wheel linkages or similar?
There are no handling issues like roll feeling, sway feeling during cornering and no sound when driving what ever the road condition is(like it had before i replaced all bushings in front suspension), pavement asphalt or rough terrain.
Track bar bushing is new,it is red colored, prothane branded. But this sound developed recently. Two days ago. How can i understand if bushing is not good without removing it? Can there be another reason for this like steering wheel linkages or similar?
There are no handling issues like roll feeling, sway feeling during cornering and no sound when driving what ever the road condition is(like it had before i replaced all bushings in front suspension), pavement asphalt or rough terrain.
Senior Member
Joined: Jun 2010
Posts: 849
Likes: 0
From: Slaughter, LA
Year: 1997
Model: Cherokee
Engine: 4.0L
On my 2wd, after I did the rear main seal, (I had dropped the track bar to get oil pan clearance, the bolt loosened up and it would shift slightly in the mount when turning the wheel with the front end on the ground and make a horrid clunking noise. It wouldn't do it when it was on a jack.
I tightened the offending bolt and the problem went away.
I tightened the offending bolt and the problem went away.
Thread Starter
Seasoned Member
Joined: Oct 2010
Posts: 299
Likes: 0
From: AnkaraTurkey
Year: 1997
Model: Grand Cherokee
Engine: 4.0
thanks for opinions. i will check one by one. something seems loose but not broken...yet
. may be track bar, may be something else.
i feel, sound and feeling getting louder and evident each day i drive and it makes me wonder if something is getting more loose.
. may be track bar, may be something else.i feel, sound and feeling getting louder and evident each day i drive and it makes me wonder if something is getting more loose.
Thread Starter
Seasoned Member
Joined: Oct 2010
Posts: 299
Likes: 0
From: AnkaraTurkey
Year: 1997
Model: Grand Cherokee
Engine: 4.0
i checked front suspension and steering elements... steering seemed loose to me and noise was getting worse, it turned out to be a loose bolt for track bar bushing..
. tightening it solved the problem and cured loose steering wheel feeling. false alarm.
. tightening it solved the problem and cured loose steering wheel feeling. false alarm. Thread
Thread Starter
Forum
Replies
Last Post
RunnerInPink
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
25
Oct 10, 2017 10:34 AM
SilverSwamper
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
15
Sep 11, 2016 01:05 PM
Hewittxj
Modified XJ Cherokee Tech
35
Aug 31, 2015 04:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




