Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! (https://www.cherokeeforum.com/f5/)
-   -   Rough drive. (https://www.cherokeeforum.com/f5/rough-drive-93339/)

mtm1516 06-18-2011 09:26 PM

Rough drive.
 
98 zj idles fine, starts fine. Once the jeep gets warm, it hesitates. I mean a noticable jump. Did complete tune up, tps, oxygen sensor. Any ideas??

ol"blue 06-18-2011 09:31 PM

Which engine does it have?

mtm1516 06-18-2011 09:56 PM

4.0

mtm1516 06-18-2011 10:03 PM

I wish this zj was HALF as awesome as my xj.

Bustedback 06-18-2011 11:56 PM

Check the fuel pressure. Check engine light on?

mtm1516 06-19-2011 01:26 PM

I do have check engine light on. I had them scanned, says oss sensor on transfer case, and camshaft sensor (on dist.). Replaced them, still have problem.

tiwvr1 06-19-2011 09:02 PM

If it did it before tune up, I would replace crank sensor (crank sensor, will throw cam sensor code) If it did after the tune up, make sure that u put copper core plugs in instead of plat, iridum, or any other ridiculious plugs. These motors are sensivtive, and have seen many a problems running anything other then copper plugs.

On a note bout the crank sensor, my jeep had the same prob. Sensor was getting heat soaked. BUT it could also be anything getting heat soaked, including coil or injectors.

mtm1516 06-20-2011 04:45 AM

Thanks!! How about the oss sensor on the transfer case? Do you have any idea why im still showing that code?

mtm1516 06-20-2011 04:47 AM

What did you do to solve the heat problem?? I did notice it only starts acting weird once the truck gets good and warm, say 25mins or so.

tiwvr1 06-20-2011 08:13 PM

Me, I replaced the crank shaft sensor.

mtm1516 06-22-2011 06:29 AM

Wow. That thing looks like a bear to take off. Anyone got any tricks for simple removal?

ct67_72 06-22-2011 07:47 AM

Im a little confused. does it hesitate to go into gear? you say it hesitates then you said that it jumps. can you clarify a little? what is the idle rpm?
Is it when you are already in gear and try to take off or is it actually when you put it into gear?


All times are GMT -5. The time now is 10:49 PM.


© 2024 MH Sub I, LLC dba Internet Brands