Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here! ZJ (93-98), WJ (99-04), WK (05+)
All ZJ/WJ/WK specific tech questions asked here!

Replace PCM, or TIPM, or both?

Thread Tools
 
Search this Thread
 
Old Aug 23, 2017 | 03:27 AM
  #1  
Shepr's Avatar
Thread Starter
Newbie
 
Joined: Aug 2017
Posts: 1
Likes: 0
Model: Cherokee
Default Replace PCM, or TIPM, or both?

2008 GC Limited, 4.7 v8, 120k. I am the new owner. I have no history on the car so i dont know what has been done to it but everythinglooks clean.

When i first got it 1 month ago, it started right up and had no codes when i scanned it.

However when i drove it, loud noise from rear differential.

I had the diff side bearings replaced at a local shop. Loud noise has gone away. Drives and shifts good. But a 'clunk' if you slowly move shifter from P to N and back to P.

Other symptoms.
I took it on a 50 mile trip and half way back as i was accellerating from a stop light a real violent shaking and shuddering started at about 35mph. I slowed down gradually as i was on freeway, and pulled over. Still running, i put in Park, then Drive, and started back up. No shuddering.

Then i noticed rear lift hatch would not open.

Then it would not start right up - acted like bad battery. Then engine light came on.

I did a complete scan: C2202, C2100, C2101, U140E, U0415, C140A, P0562, B210A, B210B, U0019, B1435. So many codes.

I have a friend who had an 07 GC that drove him crazy until he replaced the PCM. I would welcome any and all comments on this unusual problem.

Many thanks in advance
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Aug 22, 2017 07:25 AM
kettaneh
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
6
Nov 10, 2014 02:36 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 11:50 PM.