I am trying to change the rear wheel bearing on a 95 Jeep Grand Cherokee. I have removed brake rotor and am left with this:



What do I need to do next to remove the hub? I thought I should have been looking at a nut to remove the hub at this point.

 

ok thats a dana 35 with c clips you will need to take the diff cover off on each side of the carrier will be a u mount take the u mounts out and spin the rear wheels untill you see a set screw take that out then push on the hub axle side whick need bearing replaced and and go back to diff and take the little clip out and your axle will slide out

 

Thanks, I found youtube videos showing the bearing being replaced on this axle.

http://www.youtube.com/watch?v=http:...x=0&playnext=1

 

Thanks to youtube... Problem solved... Did the same thing when I removed my wheel hub few months ago...