rear shocks
Thread Starter
Member
Joined: Dec 2012
Posts: 139
Likes: 1
From: N.W. Ohio
Year: 1996
Model: Grand Cherokee
Engine: 4.0 high output
rear shocks
Just looking for an opinion. I'm changing the rear shocks on my 96 zj. Now on the top nut is out better to soak it all night or heat it up real good? I don't want to break the stud off.
Newbie
Joined: Apr 2013
Posts: 21
Likes: 0
From: GA
Year: 1993
Model: Grand Cherokee
Engine: 4.0
wouldn't hurt to brush off the crud with a steel brush then pre-soak it.
also, if you undo the axle end first then grab the shock and move it back and forth if you can before you try to break the bolt loose.
also, if you undo the axle end first then grab the shock and move it back and forth if you can before you try to break the bolt loose.
Last edited by dookie; Apr 24, 2013 at 02:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Rich164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 8, 2015 08:32 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 5, 2015 07:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)