Rear lower shock mounts rusted off
#1
Newbie
Thread Starter
Join Date: Dec 2008
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L V6
Rear lower shock mounts rusted off
I have a 93 grand cherokee limited and my rear lower shock mounts are both rusted off and I have no way to attach my new shocks. This things rides like a 2x4 on rocks, obviously, so I need to get this fixed. Whats the best solution? I know I could buy a whole new rear axle but mine is fine other than the mentioned problem. Can I buy the shock mounts from the dealer and weld them on? I've seen a few universal kits but my suspension is just stock and I plan on keeping that way. So I didnt know if they would work or not. Any input is greatly appreciated.
#3
Newbie
Join Date: Jan 2009
Location: Vancouver, WA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 L HO
Hike4It's probably right. The problem is if you had that much rust, there is a possibility there isn't enough metal left to weld onto the housing. If that's the case, then you have 3 options. . .
#1: Get a new/used Rear end with all the guts in it.
#2: Get a new/used Rear end housing and move all your guts over.
#3: Sell/Scrap the beast!
But pursue the welding angle first. . .
#1: Get a new/used Rear end with all the guts in it.
#2: Get a new/used Rear end housing and move all your guts over.
#3: Sell/Scrap the beast!
But pursue the welding angle first. . .
Thread
Thread Starter
Forum
Replies
Last Post
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 12:02 PM
ROCKRIDGE 4WD
Vendor Showcase
0
08-28-2015 12:28 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)