radio wire harness issues, not right.

Subscribe
Apr 12, 2013 | 05:28 PM
  #1  
Ok so when i got my jeep it had no radio and no factory harness the kid before me had already cut it out but that wasnt a big deal to me since i had a sony radio i wanted to wire in but when i went to get it wired in some of the colors did not match and only the drivers side speakers would work, and the dash speakers did not work

So the harness in it does not have the wires that come from the passenger door, purple and the other, doesnt work, also there is an extra clip in there with a purple/black stripe and a white with black stripe wire runing into it, does anyone know what it is???? I did not see it on any of the jeeps at the junk yard, and my jeep doesnt have dash speakers i just pulled it off, factory clip was taped back.

I can post pics in a few minutes when i get to a computer my phone cant post them.
Reply 0
Apr 12, 2013 | 06:54 PM
  #2  
What year.. I can take a look at mine tomorrow if its close to the same year..
Reply 0
Apr 13, 2013 | 03:21 PM
  #3  
1995 GC laredo
Reply 0
Apr 13, 2013 | 03:25 PM
  #4  
this is the factory harness i bought from pick n pull
Name:  20130412_145907_zpsfff865f6.jpg
Views: 24
Size:  86.1 KB

and this is the random clip i was talking about

Name:  20130412_145855_zps1006240a.jpg
Views: 23
Size:  65.6 KB

these are what wires i have.

Name:  20130412_145842_zps07dded8d.jpg
Views: 22
Size:  105.3 KB


Reply 0
Apr 13, 2013 | 04:01 PM
  #5  
This will clear it all up for ya....http://www.the12volt.com/installbay/vehicles.html
Reply 0
Apr 13, 2013 | 11:02 PM
  #6  
Quote: This will clear it all up for ya....http://www.the12volt.com/installbay/vehicles.html
That does to an extent, ill try it tomorrow, but when i pulled the door panel off the right front door to check the wires at the speaker it was purple, but hopefully it will work.
Reply 0
Subscribe
Currently Active Users (1)