quadra drive
#1
Newbie
Thread Starter
Join Date: Apr 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 4.0
quadra drive
i have a 1997 jgclimited 4.0 engine auto matic transmission ... when driving it roars and rumbles extremely loud from tthe front axel i have replace both hub bearings and changed the diff fluid i opend the inspection cover and looked at all the teeth on the gears they seem to be fine i filled it back up with proper oils and it still rumbles the diff was extremely hot and leaking fluid from the back side where the driveshaft goes in please help ... i have a complete front end for a 00 jgc what should i do
#2
CF Veteran
Join Date: Mar 2009
Location: Tenn. and Mich.
Posts: 28,068
Likes: 0
Received 6 Likes
on
6 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Welcome to CF. Sounds like bad bearings. Since the pinion seal is leaking, test for excess play of pinion bearings. Block the wheels/apply the e-brake & put it in neutral. See if you can move the driveshaft/yoke assembly up & down/sideways/in & out at all. It shouldn't have any play. This doesn't prove they're good though.
It could be the pinion bearings or the carrier bearings IMO.
It could be the pinion bearings or the carrier bearings IMO.
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
Silentj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-06-2015 08:46 PM
Trevordickya
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-04-2015 03:28 AM
mtoskippy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-03-2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)