New project
#1
Member
Thread Starter
Join Date: Sep 2010
Location: Spotsylvania VA
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
New project
Hi All,
Just picked up a new project, a 1995 Grand Cherokee Limited. The front drive shaft and the automatic temperature controller were laying in the back seat. Two questions:
1. The controller doesn't light up at all and nothing works. It has 2 connectors on the back, a large blue one and a small yellow one. I connected the large one but can't find a plug for the small one. Is that supposed to be connected? Does it have a fuse somewhere?
2. I replace the U-joints on the drive shaft and am ready to reinstall it. Does the cross brace need to come down?
Thanks
Just picked up a new project, a 1995 Grand Cherokee Limited. The front drive shaft and the automatic temperature controller were laying in the back seat. Two questions:
1. The controller doesn't light up at all and nothing works. It has 2 connectors on the back, a large blue one and a small yellow one. I connected the large one but can't find a plug for the small one. Is that supposed to be connected? Does it have a fuse somewhere?
2. I replace the U-joints on the drive shaft and am ready to reinstall it. Does the cross brace need to come down?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
12-11-2015 11:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)