Low voltage to all fuel injectors
I have a 1995 Jeep Grand Cherokee Limited with a 5.2 Liter V8 engine. I recently replaced the old engine with a remanufactured engine, but I can't get it started. It will turn over but won't start. One of the things I noticed was that all the fuel injectors are receiving 7.6 volts as opposed to the 12 volts they should be receiving. I am getting spark and the fuel pump seems to be working ok. Distributor, coil, plugs, and plug wires are all new.
Any ideas on what might be going on? |
Same problem!!
Originally Posted by jwrecord13
(Post 3533541)
I have a 1995 Jeep Grand Cherokee Limited with a 5.2 Liter V8 engine. I recently replaced the old engine with a remanufactured engine, but I can't get it started. It will turn over but won't start. One of the things I noticed was that all the fuel injectors are receiving 7.6 volts as opposed to the 12 volts they should be receiving. I am getting spark and the fuel pump seems to be working ok. Distributor, coil, plugs, and plug wires are all new.
Any ideas on what might be going on? Im thinking a bad CPS. Or plugged injectors as the gas I drained was 12 years old and very bad. |
All times are GMT -5. The time now is 06:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands