jwrecord13

I have a 1995 Jeep Grand Cherokee Limited with a 5.2 Liter V8 engine. I recently replaced the old engine with a remanufactured engine, but I can't get it started. It will turn over but won't start. One of the things I noticed was that all the fuel injectors are receiving 7.6 volts as opposed to the 12 volts they should be receiving. I am getting spark and the fuel pump seems to be working ok. Distributor, coil, plugs, and plug wires are all new.
Any ideas on what might be going on?

42fordscrpit

anybody find a solution to this? I have the exact same issue. Fuel pump is new and cycling. Good pressure. Asd is cutting the injectors after the 2 sec start up. Voltage goes from 12 to a steady 6.7. Will run on spray into throttle body. The motor turns over and over and skips a little here and there.
Im thinking a bad CPS. Or plugged injectors as the gas I drained was 12 years old and very bad.