losing my bearings
Thread Starter
Newbie
Joined: Sep 2009
Posts: 17
Likes: 0
From: Poconos Pa.
Year: 2004
Model: Cherokee
Engine: 4.0
Hi Guys, new to this forum. Thanks for having me. I have two wranglers '93 & '97. Well i just bought a '04 grand cherokee laredo. I think i need to replace the rear axle bearings. The vehicle has four wheel disc brakes. When i have it jacked up i can wiggle the tire up and down a bit (with a pipe under it ). This is happening on both sides. Do you think it sounds like bearings and if so how hard is it to replace.
Any instructions or help would be greatly appreciated.
Any instructions or help would be greatly appreciated.
CF Veteran
Joined: Mar 2009
Posts: 28,068
Likes: 6
From: Tenn. and Mich.
Year: 2004
Model: Grand Cherokee
Engine: 4.7L V8
Yeah, it sounds like bearings to me.
On your '04 you need to take the axle shafts to a machine shop after removal to have the old bearings and seals removed and new ones installed.
You should pick you up a haynes or other repair manual for your Jeep. They help a lot sometimes.
And Welcome to CF.
On your '04 you need to take the axle shafts to a machine shop after removal to have the old bearings and seals removed and new ones installed.
You should pick you up a haynes or other repair manual for your Jeep. They help a lot sometimes.
And Welcome to CF.
Thread
Thread Starter
Forum
Replies
Last Post
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Feb 27, 2023 03:38 PM
chrispl57
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Sep 30, 2015 08:13 AM
seanie11
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Sep 11, 2015 04:42 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



