Jeep wont start?
#1
Newbie
Thread Starter
Join Date: Sep 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Jeep wont start?
Ill try to keep this short.
I replaced a rear vent window on my 96 Jeep Grand Cherokee. After completion, I am unable to start the Jeep. The security notification was flashing on the dash, the lights were flashing. When I try to start it, it just clicks rapidly and loudly. I disconnected the door at the electronic connection, I have pulled the security fuses and disconnected the battery, but for only a minute or two. I thought maybe I needed to reset the PCM. Help me out here? How can I fix? Thanks!
I replaced a rear vent window on my 96 Jeep Grand Cherokee. After completion, I am unable to start the Jeep. The security notification was flashing on the dash, the lights were flashing. When I try to start it, it just clicks rapidly and loudly. I disconnected the door at the electronic connection, I have pulled the security fuses and disconnected the battery, but for only a minute or two. I thought maybe I needed to reset the PCM. Help me out here? How can I fix? Thanks!
#3
Junior Member
Join Date: Mar 2012
Location: Swanton Ohio
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
use the ignition key in the drivers side door from the outside and lock and unlock the door with the key. it resets the security system. It will start after that almost guarantee thats your problem
Thread
Thread Starter
Forum
Replies
Last Post
zumer715
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
07-08-2022 05:17 PM
Ashs1714
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-04-2015 10:14 PM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
40
08-26-2015 12:08 AM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-25-2015 11:50 AM
14lgreer
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
08-21-2015 01:46 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)