Issue after balljoints and all new draglink
Thread Starter
Former Sponsor
Joined: Feb 2010
Posts: 474
Likes: 0
From: Roanoke VA
Year: 1995
Model: Grand Cherokee
Engine: 4.0L
Issue after balljoints and all new draglink
Replaced the balljoints in the ZJ and while I was at it I installed new TRE's, tracbar, steering stabalizer, etc..
The steering is much tighter but even after an alignment and having the tires balanced on 4 different occasions I get a vibration / shake in the wheel at 50-60 and some bad bump steer.
I also occasionally feel something popping / shifting in the drivers floor board. I crawled under and had someone turn the wheel side to side and everything looks tight, however I do notice the axle shift from side to side slightly. Is this normal?
What should I look for?
The steering is much tighter but even after an alignment and having the tires balanced on 4 different occasions I get a vibration / shake in the wheel at 50-60 and some bad bump steer.
I also occasionally feel something popping / shifting in the drivers floor board. I crawled under and had someone turn the wheel side to side and everything looks tight, however I do notice the axle shift from side to side slightly. Is this normal?
What should I look for?
Thread
Thread Starter
Forum
Replies
Last Post
DBFinney
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Jun 3, 2024 10:49 PM
Fubar92627
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
Jun 11, 2017 12:59 PM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
Nov 7, 2015 01:22 AM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Sep 8, 2015 06:28 AM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
Sep 7, 2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)