Injector #4 issues
03-07-2015, 05:24 PM
#1
Newbie
Thread Starter
Join Date: Mar 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Injector #4 issues
Injector #4 is not getting anything from the pcm. I have tried running a jumper and it still doesn't work.. I cannot afford a new pcm at the moment, but need to get my daily driver back up and running. Can I splice into another injector that fires at the same time? If so which one do you think will work?
03-08-2015, 05:47 AM
#2
Member
Hi I would say no as the terminals in the distributor Are after each other, the spraying of the injectors can not be in the same time. Not to mention that with two injectors connected you could overload the output of the pcm.
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Upgraded 4 Hole 87-98 Injectors
JeepStephie99
Engines/Tranny/T-Case
107
07-12-2016 01:58 PM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
09-08-2015 06:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)