hot temp gauge / bad flow?

Subscribe
Oct 19, 2011 | 01:52 AM
  #1  
Hi, i have trouble with my temperatur gauge reading 105-110 celsius (225F), its stable at 105-110 (225F) all the time. As mentioned in other threads i have replaced and done everything and all sensors are good, but yesterday i used tha car (i dont use it to much) and it was 0 celsius outside and i didnt get tha car very hot inside in a 10min ride, but the engine was 105-110 celsius (225F) all the time. There is hot air coming out of the fan ducts, but not very hot. If i let the car go on idle it gets a litle hotter (the air). I can feel big (if i hold on them) difference in the temperature on the hoses that goes to the heater core. I use a 82 celsius (180F) Thermostat and the water in the radiator isnt to hot at all. Could it be bad flow in the heater core thats the big problem. If i run without thermstat att all it takes a litle longer before it goes up to 105-110 celsius (225F), but it stays up there then to. I have flushed the system 2 times, but i havent flushed the heater core (alone).
Reply 0
Oct 19, 2011 | 02:23 AM
  #2  
If it is bad flow in the coolant system, could it be hot in the rear of the engine and normal (cold) in the front? I havent replaced the water pump, i have a new one but when i tok out the old it was 100% and almost new.
Reply 0
Subscribe
Currently Active Users (1)