Engine stumbles
#1
Newbie
Thread Starter
Join Date: Jun 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine stumbles
98 jeep grand cherokee engine stumbles at idle and throughout driving range. It started suddenly whie driving down the road. Auto parts place said crankshaft sensor. Then as we were leaving, it started running just fine. 100 miles later, it started again, so I replaced the crankshaft sensor. But I still have the same problem. Pulled codes and crankshaft code isn't there anymore. The only ither code is fuel level sensor A circuit high input. Which I think has been there for years as I've always had problems with the fuel gauge. Open to ANY suggestions.
#3
Junior Member
Join Date: Dec 2010
Location: virginia
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Grand Cherokee
Engine: 4.0
me too.
im having the same issue, except mine seems to be ok at idle. throughout the driving range (once it gets hot) it stumbles like crazy. hopefully someone knows the deal with this issue.
#4
Newbie
Join Date: Jun 2011
Location: bronx, new york
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 4.0 liter line 6cyl.
remove air filter cover and spray carburetor cleaner around and inside the butterfly, wipe clean and restart engine keep mouth open and spray inside while running. it helped me with same problem. good luck. my jeep is a gc 1997 and 205,000+ miles
Thread
Thread Starter
Forum
Replies
Last Post
Jamesmon4
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
08-16-2016 09:04 PM
Coffinshaker
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
10-12-2015 08:27 AM
LiamLikeNeeson
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
09-09-2015 11:30 AM
BlvdKreeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-08-2015 04:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)