D44A Gears ?
Thread Starter
Junior Member
Joined: Sep 2007
Posts: 50
Likes: 0
From: Hamburg, Germany
D44A Gears ?
Hallo.
Where can I buy D44A gears? I only find them for standard D44 axles like the ones in my TJ.
A friend has a 5.9L ZJ and wants to regear to 4.11 because itīs a bit sluggish with the 31s tires.
Thanks !
nicolas-eric
Where can I buy D44A gears? I only find them for standard D44 axles like the ones in my TJ.
A friend has a 5.9L ZJ and wants to regear to 4.11 because itīs a bit sluggish with the 31s tires.
Thanks !
nicolas-eric
CF Veteran
Joined: Mar 2008
Posts: 5,902
Likes: 19
From: Kalkaska, Michigan
Year: 2001
Model: Cherokee
Engine: 4.0L
you can get them here.. http://www.rocky-road.com/grand.html
No there not the same as the standard D44.
See the HD D44 also known as the D44a, runs a D44 ring gear with a D60 pinion. So to make them work together it's a "odd" gear tooth pitch..
The gears sets are also the same as whats used in early Vetts and the first generation Vipers..
The axle really is stronger than given credit for. It's down side is the alloy center section which can crack when wheeled hard in the rocks. And that can be fixed with a truss and diff skid..
No there not the same as the standard D44.
See the HD D44 also known as the D44a, runs a D44 ring gear with a D60 pinion. So to make them work together it's a "odd" gear tooth pitch..
The gears sets are also the same as whats used in early Vetts and the first generation Vipers..
The axle really is stronger than given credit for. It's down side is the alloy center section which can crack when wheeled hard in the rocks. And that can be fixed with a truss and diff skid..
CF Veteran
Joined: Apr 2008
Posts: 2,237
Likes: 3
From: Northern Illinois
Year: 90
Model: Cherokee
Engine: 4.0
you can get them here.. http://www.rocky-road.com/grand.html
No there not the same as the standard D44.
See the HD D44 also known as the D44a, runs a D44 ring gear with a D60 pinion. So to make them work together it's a "odd" gear tooth pitch..
The gears sets are also the same as whats used in early Vetts and the first generation Vipers..
The axle really is stronger than given credit for. It's down side is the alloy center section which can crack when wheeled hard in the rocks. And that can be fixed with a truss and diff skid..
No there not the same as the standard D44.
See the HD D44 also known as the D44a, runs a D44 ring gear with a D60 pinion. So to make them work together it's a "odd" gear tooth pitch..
The gears sets are also the same as whats used in early Vetts and the first generation Vipers..
The axle really is stronger than given credit for. It's down side is the alloy center section which can crack when wheeled hard in the rocks. And that can be fixed with a truss and diff skid..
And a REALLY nasty habit of spinning the bearings in their races when the heat builds up in them....
CF Veteran
Joined: Mar 2008
Posts: 5,902
Likes: 19
From: Kalkaska, Michigan
Year: 2001
Model: Cherokee
Engine: 4.0L
Thread
Thread Starter
Forum
Replies
Last Post
shadowmoses
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 30, 2015 06:51 PM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 29, 2015 08:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)