"Automatic LOAD LEVELING"
Thread Starter
Newbie
Joined: May 2015
Posts: 6
Likes: 0
From: Florida
Year: 2015
Model: Grand Cherokee
Engine: 3.0 Turbo Diesel
"Automatic LOAD LEVELING"
Just picked up a new 2015 GC DIESEL 4X4.
Just as a note my only complaint after driving 4 on test drives I noted that they lean or sway "big time" in a turn or swerve. I'd like to change or add a heavier SWAY BAR. I measured the FRONT bar at 1 1/4"....the puny rear bar is 7/8" Maybe that can be swapped for an SRT sway bar.
Here's the question....the data sheet shows "automatic load leveling" is installed. I got under it today and there are NO AIR SHOCKS......so???? HOW does anything level itself? I need to know this because the 4X4 shop that I visited said that they could get sway bars for the GC IF it did not have "air suspension or rear "air leveling" I DO NOT have the air suspension package....that was a SUMMIT thang and cost about $5,000. Really scratching my head over this leveling system though......
Any help?
Just as a note my only complaint after driving 4 on test drives I noted that they lean or sway "big time" in a turn or swerve. I'd like to change or add a heavier SWAY BAR. I measured the FRONT bar at 1 1/4"....the puny rear bar is 7/8" Maybe that can be swapped for an SRT sway bar.
Here's the question....the data sheet shows "automatic load leveling" is installed. I got under it today and there are NO AIR SHOCKS......so???? HOW does anything level itself? I need to know this because the 4X4 shop that I visited said that they could get sway bars for the GC IF it did not have "air suspension or rear "air leveling" I DO NOT have the air suspension package....that was a SUMMIT thang and cost about $5,000. Really scratching my head over this leveling system though......
Any help?
Thread
Thread Starter
Forum
Replies
Last Post
libengan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Nov 6, 2015 09:16 AM
xjcarolina
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 29, 2015 08:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)