Adjusting tranny bands???
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2004
Model: Grand Cherokee
Engine: 4.0
Adjusting tranny bands???
I'm replacing the fluid and filter in my 04 GC Laredo (4.0) and the Haynes recommends adjusting the bands.
Should I do it or not? I have approx. 81K on the truck.
Should I do it or not? I have approx. 81K on the truck.
#2
CF Veteran
I would not unless you have done them before.. I had to do mine on my "94 ZJ cause of it slipping and it was a pain to do it right. All the write ups about torq than back them down were BS. I stripped out the heads on 2 of the adjusters.
#3
Member
Join Date: Jan 2009
Location: Fayetteville
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.7L stroker with 99+ intake
The kickdown band(front one) torque it down to 72lbs/in then back it off 2 5/8's turns, the rear band it also torqued to 72lbs/in and backed off 3 turns. DO NOT do it without a in/lbs torque wrench.
Thread
Thread Starter
Forum
Replies
Last Post
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
tleed
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
10-04-2015 01:20 PM
sjm79902
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-30-2015 11:14 PM
ToxicFox
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-27-2015 06:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)