Adding electric fan
#1
Member
Thread Starter
Join Date: Feb 2011
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Grand Cherokee
Engine: 5.2L V8
Adding electric fan
I tend to run a little hot while on trails or long trips up hills. I was thinking of adding an electric pusher fan to assist with cooling. Is there any cons to this?
#2
Senior Member
Join Date: Oct 2011
Location: Cape May, NJ
Posts: 729
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Grand Cherokee
Engine: 4.0
The amount of room you dont have lol. I dont think you could run and electric fan and your clutch fan. Id just pull the clutch fan off and run an electric. Im going to be doing that soon once i get the rest lf the quirls worked out and my camaro on the road so i have another driver. I havent done alot of research but ive been told a fan from a ford tauras is ideal size air pushed through yada yada yada. And just wire it up to a switch or they have temp switches you can set to a certain temp (i jave one on my camaro and have it set at 100 degrees and the car has never seen 160+ and love the setup
#7
Senior Member
Join Date: Jan 2010
Location: Mt. Iron, MN
Posts: 704
Likes: 0
Received 1 Like
on
1 Post
Year: 96 Limited ZJ
Model: Grand Cherokee
Engine: 5.2 w/mods
The Tauras fan will be all you will need. Just pull the clutch fan and wire in an electric fan. It is a 2 speed fan hi-lo. Great swap for any ZJ. Grab the Fan shroud with it for max effectiveness. This is a very common conversion in many different types of vehicles from sports cars to offroad Jeeps! Found on the early Tauras, Mark VIII and a few others cant remember off the top of my head.
Thread
Thread Starter
Forum
Replies
Last Post
Karmageddon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
10-05-2015 08:29 PM
Gauge
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
09-15-2015 07:52 PM
synergy58
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
09-08-2015 11:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)