98 grand cherokee laredo 4x4
#1
Newbie
Thread Starter
Join Date: Oct 2017
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
98 grand cherokee laredo 4x4
Hey guys I've run into another problem. So the quick version is I've changed plugs, plug wires, distributor cap and botton. Even changed out the TPS and MAP sensors just changed the CPS as told by another jeep owner and still a stall and rough idle....other then being out of time what else is there...All ideas are appreciate, thanks in advance. (98 Grand Cherokee laredo 4x4 4.0)
#2
CF Veteran
Lets see, you got the spark covered, might be compression, might be fuel.
#3
Newbie
Thread Starter
Join Date: Oct 2017
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee(SJ)
98 GCL 4.0
Well I decided to go out and test a few things, also took the carb and all sensors out to clean the carb and noticed after everything but the IACV was hooked up and I noticed while cleaning it and put it all back together that when I started it the missfire/stall didn't ease up so 1 by 1 I started in. I unplugged the map sensor and it died same with the TPS but when I unplugged the IACV there was no change.....is it supposed to be like that or have I found my problem?