07 GC hid problem
#1
Newbie
Thread Starter
Join Date: Sep 2010
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
07 GC hid problem
hey
i recently installed a low beam HID kit on my 07 jeep grand cherokee. they look great when they are on but when i shut the lights of the bulbs stobe/flicker for 30 secs- a min. i tried buying a hid capacitor but when i hooked it up the lights still strobe/flickered. how can i stop the flickering/strobe when i turn the lights off???
thank u!!
i recently installed a low beam HID kit on my 07 jeep grand cherokee. they look great when they are on but when i shut the lights of the bulbs stobe/flicker for 30 secs- a min. i tried buying a hid capacitor but when i hooked it up the lights still strobe/flickered. how can i stop the flickering/strobe when i turn the lights off???
thank u!!
#3
Seasoned Member
Join Date: Oct 2010
Location: AnkaraTurkey
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Grand Cherokee
Engine: 4.0
it flickers like storbe right? our WH (euro WK) did same thing to us. It is 3.0CRD.
You need to use relays on both sides before HID ballasts after stock harness.
You need to trigger relay by it self. Sounds weird right? But it works, you will use trigger wires on relay harness to turn relay on when you turn on lights(it will open relay and will let voltage pass thorugh it because you will connect negative of trigger section on relay to supply voltage to + wire and output will go to ballasts), but when it is off, lower voltage coming from lamp module will not be "long" enough to turn on lights (actually turning on the relay first)
do not forget to adjust head lights little lower compared to halogens.
You need to use relays on both sides before HID ballasts after stock harness.
You need to trigger relay by it self. Sounds weird right? But it works, you will use trigger wires on relay harness to turn relay on when you turn on lights(it will open relay and will let voltage pass thorugh it because you will connect negative of trigger section on relay to supply voltage to + wire and output will go to ballasts), but when it is off, lower voltage coming from lamp module will not be "long" enough to turn on lights (actually turning on the relay first)
do not forget to adjust head lights little lower compared to halogens.
Thread
Thread Starter
Forum
Replies
Last Post
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
10-18-2022 04:11 PM
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
03-17-2022 02:15 PM
Jeepy11
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2015 09:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)