Vermonster01

Year: 1997
Model: Cherokee Sport
Lift: 3" Suspension Lift
------------------------------
Hey guys, This may be a relatively slow process because I'm 16 and have no job right now, but I figured I would start a build thread showing the process of getting my cherokee back to inspect able condition, I already fixed the Emergency brake, and brakes.
Current project: Clutch Master/Slave Cylinder.
Current condition:


Master/Slave Out:

rmoore1031

ZRT build huh? I'll be following this. You should join the ZXJ Zombie Response Jeep Club. Link is in my signature.

xjcountry1995

Yep keep it up

Vermonster01

Sorry for the delay, A couple weekends back I was able to get the master/slave back in, and now its shifting good (Minus Into reverse which will be fine as long as I go into 1st,2nd, or 4th before hand to get it on the same bar) My current project is getting my muffler back together because a logger came up over the weekend and kinda ruined the drive, and as I backed up it snagged and pulled the muffler apart. then I will most likely be tackling the rockers (2x6 tube) then all I should have left before I can get it on the road will be the left rear shock that is snapped off on top. then I may be taking some automotive tech courses, get into welding and maybe make a roof rack and I nice beefy bumper.
(Depending how things go may be joining the army which will slow things down a LOT)

Vermonster01

[Update]
Me and my bro in law are currently working on my left rear shock, Pictures coming soon hopefully.

XJwonders

That's a good start