BulletProofTech

Alright guys I figured that I would put out everything that I have done to my jeep so far and everything else that I have planned out. I have done many things over the year that I have had this jeep. But We are going to start from when I first got the Jeep.

BulletProofTech

OK this is what the jeep looked like when I did first get it, Had no lights. Almost no tread Federal Tires, and needed some TLC.

BulletProofTech

So the First major thing that I had to do was Fix the death wobble and get rid of the spacers. I also did go out and buy some BFG KO2 31/10.5/15 for the jeep. And that also happend to fix the death wobble. Also took one of the old tires and rims and put it back on the tire holder.

BulletProofTech

Ok The next cool thing that I did was got a 20" Light bar for the front of the Jeep. Picked it for around $50.




AuxBeam 20" Light Bar





AuxBeam 20" Light Bar

BulletProofTech

BulletProofTech

After I installed the 20" Light bar I was going to start working on the Pillar Pod mounts.

BulletProofTech

Also in the same week I made my own CB antenna Mounts for the back of the jeep. That way the CB I got over Christmas could be put to use.

BulletProofTech

Now a Big Project, The Switch panel that I wanted to put of the roof of the Jeep. This would control all of the LED Lights.

BulletProofTech

BulletProofTech

Ok then a long time latter I get the motivation to Install my revers lights that I did get a long time ago. The weather was finely not snow and warm.

BulletProofTech

Now the latest thing that I have done to the jeep has been the roof rack. Used 1" Square tube and built it from the ground up.

CR-Snow

I like the switch box/cb mount. Cool to see someone making lots of stuff from scratch.

BulletProofTech

I always like making things, so I figure since I want to make my jeep my own, I would make it how I like to see it. And I always take in new ideas from other people.

BulletProofTech

Did the coolant change on the jeep, Well there was less coolant in there than I thought.

BulletProofTech

Well I got something done that I have been wanting to do for a long time. Cutting and folding of my jeep fender flares.