tw1gz white 92 xj
5 Attachment(s)
Lurked on this website for a while now figured might as well start a build thread for my jeep. What up.
This is my 92 xj a little after I got it last october. Learning as I go so please bare with me, although I am getting help from my dad on some of the bigger projects. Attachment 407034 List of upgrades that were on it when I bought it - -3.5 in procomp leaf springs. -2 in drop shackles. -4.5 in front coil springs -bilstein front shocks/procomp rear shocks -33x12.5x15 bfg at tires -craiger 15x10 wheels -ac retrofitted to r134s -aftermarket headlights -brown dog motor mounts -rubicon front and rear extended steel braided brake lines -light cubes and switch panel for lights / ? -rear bumper spare tire mount -Pioneer deck and rockford and fosgate speakers -front and rear bar pin eliminators -new track bar -new power stearing gear box -maintence upgrades New upgrades since purchase - -Torn out the old carpet/installed new black carpet/new black dashmat -changed my speedometer cluster to white leds -replaced driver side seat -added rough country shackle relocators -added spectre cold air intake -new battery -painted front diff cover and put dana logo on -replaced passenger side floor pannel I have new taller 4.5 in coils, rough country control arm drop down brackets, and rustys adjustable control arms I will be installing this weekend. After That I plan on upgrading the steering and then getting new shocks, frame stiffeners, rustys fenders w/ armor, new bumpers, hood rack and more stuff I would be here for days listing everything as you all know it is never ending. I want to go to a junkyard soon and look for neon fuel injectors. Here are some more pics of stuff since I have had it, now that I have this thread going I will start taking pics of everything as I do it. These are just what I have in my phone right now, will update this weekend. Attachment 407035 white leds installed, this was before i got my new dashmat Attachment 407036 shackle relocators added Attachment 407037 new spectre cold air intake added. Attachment 407038 front diff looks tough painted |
Do you know if that is an OEM spare tire carrier? Also jeep looks great!
|
Originally Posted by kyle96xj
(Post 3421326)
Do you know if that is an OEM spare tire carrier? Also jeep looks great!
|
That's a stock tire carrier. Rig looks good.
|
Originally Posted by OmgNoWai
(Post 3421557)
That's a stock tire carrier. Rig looks good.
|
1 Attachment(s)
Yesterday I Put in rustys adjustable control arms, and new 4.5 in coils. Wednesday hack and tap will be installed and I just ordered new crager hub caps and console.
Attachment 407033 |
Looking at your third picture of the wheel and shackle it may be worth getting a set of hub centric wheel rings if you have any vibrations going on. $20 well spent in my experience.
|
Originally Posted by OllyDenny
(Post 3421957)
Looking at your third picture of the wheel and shackle it may be worth getting a set of hub centric wheel rings if you have any vibrations going on. $20 well spent in my experience.
|
1 Attachment(s)
Today was a good day. Did cut and fold inside the front two fenders and painted the inside. Cleaned my shocks. Fixed my tie rod angle until I get my new steering in a week or two, installed new front driveshaft and checked angle and the angle is good. Located a couple bushings to replace, regreased the front end. Finally got to take it for a drive after going from 3.5 to around 5 inch of lift and the new control arms/drop brackets and shackle relocators and the new cold air intake, thing sounds like a straight beast and it rides SO much nicer. This weekend hack n tap and possibly new steering. Of course I only remembered to snap one picture, after doing the cut and fold and applying silicon just before painting.
Attachment 407032 |
Originally Posted by kyle96xj
(Post 3421565)
It looks stock but I've only ever seen the ones that mount on the body as well as the bumper, that's why I asked. either way it would be cool to see some pictures of how it mounts
http://i60.tinypic.com/2jafaco.jpg |
sunday hack n tap and disk breaks will be installed to replace the drum breaks currently on. ordered rugged ridge hd steering yesterday. |
4 Attachment(s)
installed new front and back drive shafts + SYE. Angle looks really good.
Attachment 407028 Attachment 407029 Attachment 407030 lookin good. new steering next. Attachment 407031 |
Subbed!
Where the hell did you get the Spectre cowl intake? I thought they stopped making them. Are they back? |
Originally Posted by TFitzPat87
(Post 3424566)
Subbed!
Where the hell did you get the Spectre cowl intake? I thought they stopped making them. Are they back? |
Good find! I'm still trying to get my hands on one. The more time that passes, the less likely I think I'll find one.
|
All times are GMT -5. The time now is 08:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands