Time to Rebuild-We can build it better
04-20-2010, 11:33 AM
#16
CF Veteran
Join Date: Jan 2010
Location: St Augustine Florida
Posts: 1,087
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0
Great Job...very well done... And im sure it will last anotehr 200k... +
One of the only jeeps i have yet to see done.. and acually looks like it was done by a PRO>.. guess you are one :} Hope she runs as great as she looks..
Greg
One of the only jeeps i have yet to see done.. and acually looks like it was done by a PRO>.. guess you are one :} Hope she runs as great as she looks..
Greg
04-20-2010, 11:47 AM
#17
Seasoned Member
Thread Starter
Join Date: May 2009
Location: Wy & OK
Posts: 296
Likes: 0
Received 1 Like
on
1 Post
Year: 83 CJ7 & '96 XJ & '97 XJ
Model: Cherokee
Engine: 258ci, 4.0 & 4.0
Actually the engine was fine, it was the throwout bearing. I decided with so many miles I should just pull the motor while I was replacing the clutch and rebuild everything at the same time. I replaced just about everything that could be. I even put in a new heater blower, All new AC except the lines. All new clutch from the master cylinder/Slave on down (Zoom Clutch and pressure plate). Motor rebuilt 30 over, heads rebuilt. Patched and welded the header. All new sensors and modules. Magnaflow Muffler. New alternator, coil etc.
04-20-2010, 02:01 PM
#21
Senior Member
Join Date: Jul 2009
Location: Yelm Wa
Posts: 822
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: 4.0
Actually the engine was fine, it was the throwout bearing. I decided with so many miles I should just pull the motor while I was replacing the clutch and rebuild everything at the same time. I replaced just about everything that could be. I even put in a new heater blower, All new AC except the lines. All new clutch from the master cylinder/Slave on down (Zoom Clutch and pressure plate). Motor rebuilt 30 over, heads rebuilt. Patched and welded the header. All new sensors and modules. Magnaflow Muffler. New alternator, coil etc.
04-20-2010, 03:24 PM
#24
Seasoned Member
Thread Starter
Join Date: May 2009
Location: Wy & OK
Posts: 296
Likes: 0
Received 1 Like
on
1 Post
Year: 83 CJ7 & '96 XJ & '97 XJ
Model: Cherokee
Engine: 258ci, 4.0 & 4.0
I would say on the High Side about $2500.00 that includes machine work, everything was new, (AC Compressor, Alt etc) not rebuilt so that made it a little more costly, I'll try to list it by item and cost at a latter time.
