Tarantula Build
#33
Member
Thread Starter
Join Date: Jun 2010
Location: Brownsville, Texas.
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
thanks everyone, ill have more progress pictures tomorrow all mounted with brakes and hopefully out of the garage if everything goes well. still need to mount the axle, bleed brakes, and rotate the muffler so that i can clear the drive-shaft.
#36
Member
Thread Starter
Join Date: Jun 2010
Location: Brownsville, Texas.
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
alright so work got a little slow since my son got sick recently but finally done, well sorta.. i still need alignment, rotate muffler, maybe replace the rear bumper with something else, AND! im gonna be lowering he rear about 1.5" to sit level, i didn't know that the M.O.R.E mounts lift up the rear 1.5"....
took it for a test drive and everything seems good.
took it for a test drive and everything seems good.
Last edited by TarantulaS2; 07-27-2011 at 01:54 AM.
#39
Member
Thread Starter
Join Date: Jun 2010
Location: Brownsville, Texas.
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
i take that question like if your asking to sleep with my wife.. it aint gonna happen.. hahaha.
well i have a problem, i have a low pitch wine when i press on the gas over 10mph-30mph if i let go of the gas it goes away, im thinking bad u-joint since when i installed the ford 8.8 yoke on my driveshaft, "one" of the stick bearings inside the u-joint came out, i didn't think anything of it but i guess that's what i get for trying to rush things..
any thoughts of what else it could be?? maybe a bad bearing if its not the u-joint??
well i have a problem, i have a low pitch wine when i press on the gas over 10mph-30mph if i let go of the gas it goes away, im thinking bad u-joint since when i installed the ford 8.8 yoke on my driveshaft, "one" of the stick bearings inside the u-joint came out, i didn't think anything of it but i guess that's what i get for trying to rush things..
any thoughts of what else it could be?? maybe a bad bearing if its not the u-joint??
#42
Member
Thread Starter
Join Date: Jun 2010
Location: Brownsville, Texas.
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
well i know its coming from inside the pumpkin so that blows...
i called javier around 12 but he didnt asnwer and hasnt called me back..
thanks, im using a Hobart 187 gass-less with Lincoln flux-core wire for now..
here is a video of the sound it makes.. any ideas?
listin to 31sec+
i called javier around 12 but he didnt asnwer and hasnt called me back..
thanks, im using a Hobart 187 gass-less with Lincoln flux-core wire for now..
here is a video of the sound it makes.. any ideas?
Last edited by TarantulaS2; 07-29-2011 at 06:42 PM.
#45
Member
Thread Starter
Join Date: Jun 2010
Location: Brownsville, Texas.
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0
no updates yet. guy never answered. so its been collecting dust in the garage.. soon enough im gonna have to try to break into it myself.