Starting work on '90 XJ
Thread Starter
Senior Member
Joined: Jan 2010
Posts: 846
Likes: 0
From: South Louisiana
Year: 1990
Model: Cherokee
Engine: 4.0
I also stopped by and picked up the materials for the bumper. 1-10 ft section of 6"X1/4" flat bar for the "frame" brackets and winch mounting. 1-10 ft section of 6"X3/16" flat bar for the front section and gussets. And a 4'X8'X1/8" flat plate for the top and other misc stuff. All these materials only set me back $160...not bad!!
Thread Starter
Senior Member
Joined: Jan 2010
Posts: 846
Likes: 0
From: South Louisiana
Year: 1990
Model: Cherokee
Engine: 4.0
thanks kaleb! me too! couldn't turn it down for the price!
ok i should be starting on the bumper tonight after work. i have a fab thread started for it already so to avoid double post just follow it there
https://www.cherokeeforum.com/f58/wi...r-works-75594/
i'll post pics of the final product on this thread tho
ok i should be starting on the bumper tonight after work. i have a fab thread started for it already so to avoid double post just follow it there
https://www.cherokeeforum.com/f58/wi...r-works-75594/
i'll post pics of the final product on this thread tho
Thread Starter
Senior Member
Joined: Jan 2010
Posts: 846
Likes: 0
From: South Louisiana
Year: 1990
Model: Cherokee
Engine: 4.0
Originally Posted by South_La_XJ
I hope it has mounts that run down the side of the frame and not just bolt to the front of the rails where the factory did.
Sent from my iPhone using CherokeeFM