Project Wasatch Warrior
#1
Newbie
Thread Starter
Join Date: Sep 2010
Location: Provo, UT
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Year: '96
Model: Cherokee
Engine: 4.0 HO
Project Wasatch Warrior
I bought myself a '96 XJ a few months back and after a bit of saving finally got around to lifting it and adding some wheels/tires. As such, I thought it fitting that I would start a build thread. So here goes:
BEFORE:
AFTER:
Lift is a 4.5" kit from Rough Country. Currently the XJ is not drive-able because the left turn radius is gone after the alignment. Drop pitman arm is apparently the fix. Wheels and tires are 32x11.50 KM2's and some Soft 8's.
Plans:
Paint it with flat tan rattlecan.
Rip out carpet.
Replace seats.
Install Tuffy security console I have sitting in my living room.
Install drop pitman arm and steering stabilizer.
BEFORE:
AFTER:
Lift is a 4.5" kit from Rough Country. Currently the XJ is not drive-able because the left turn radius is gone after the alignment. Drop pitman arm is apparently the fix. Wheels and tires are 32x11.50 KM2's and some Soft 8's.
Plans:
Paint it with flat tan rattlecan.
Rip out carpet.
Replace seats.
Install Tuffy security console I have sitting in my living room.
Install drop pitman arm and steering stabilizer.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)