Project Outcast
#1
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Year: 90
Model: Cherokee
Engine: 4.0
Project Outcast
I got a 90 Cherokee with a 4.0l, AW4, np231 stock as a rock right now. Plans are to install chromoly axles in the d30 with ox ujoints, ox locker and 4.88. Rear will have 4.88 and detroit. Rubicon suspension lift. Here are pics of the starting rig.
#3
CF Veteran
Join Date: Jan 2009
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Year: 87
Model: Cherokee
Engine: 4.0
I was wondering the same thing about the OX locker. I know 2 ppl who are running them, and while they ;ike them, they have both had issues with the cable shifter coming loose on the shift fork. Chad ended up buying an air actuator for his.. not sure what jason did.
The only reason why I say this.. is now you have the choice of the ARB or the E-Lected lockers.
The only reason why I say this.. is now you have the choice of the ARB or the E-Lected lockers.
#5
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Year: 90
Model: Cherokee
Engine: 4.0
I am going with the ox locker becuase buddy of mine has ran one iwth no issues. I bought a guys axle set up, and the ox, detroit, 4.88s and chromoly were all included. Thats the biggest reason of all. My buddy has had no issue with his ox after he got the cable properly adjusted. As far a lift it will be between 6" maybe a touch more when all done. Have to make room for the 36" Iroks.
#6
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Year: 90
Model: Cherokee
Engine: 4.0
Sorry Guys cam wasnt working this afternoon. I guess you have to charge the batteries sometimes. Any ways I got the rear suspension put on today along with the detroit and 4.88 in the rear end. I will get pics on here soon it is lookin cool. Hope to start the front tomorrow.
Trending Topics
#10
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Year: 90
Model: Cherokee
Engine: 4.0
Yeah it turned out a little taller than expected. But the IROKS are on with no trimming. I think it will settle a little after I start driving it. Started on the front today should be able to get pics on tonight.
#11
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Year: 90
Model: Cherokee
Engine: 4.0
Here is a few with the old front gone. Ya know goin' to work plays hell on your wheelin project. LOL Should have the front finshed by the weekend. Front is a D30 with Ox locker, 4.88's, Chromolyaxles and Ox joints along with the 36" Iroks. I am also installing long arms with the new suspension.
#14
Senior Member
Join Date: Dec 2008
Location: northwest Indiana USA
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990 laredo
Model: Cherokee
hey the jack stand is in front of the tire making sure it does not slide away.
I would not get under that thing until you add some other stands, just friendly advice.
I would not get under that thing until you add some other stands, just friendly advice.
#15
Junior Member
Thread Starter
Join Date: Jan 2009
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Year: 90
Model: Cherokee
Engine: 4.0
Believe it or not it is sturdier than it looks. It dont even move. The last thing I want is that SOB on my head. Plus I have abuddy that says it alll "Poor men have poor ways."