Project "Neglected"
#91
Senior Member
Thread Starter
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Got a some stuff done today.
Passenger rocker cut off and mocked up, just needs to be burned in.
Rear shocks done
Front LCA mounts cut off - that was fun.
Gas tank back in
Fired her up let her run for a bit.
She stayed at temp...I was worried about a coolant leak cause I've noticed some anti freeze puddles in the mornings after nights I've cranked it over/ had it running for short periods of time..nothing leaked out while running and nothing's leaked yet...guess we will see in the morning.
Passenger rocker cut off and mocked up, just needs to be burned in.
Rear shocks done
Front LCA mounts cut off - that was fun.
Gas tank back in
Fired her up let her run for a bit.
She stayed at temp...I was worried about a coolant leak cause I've noticed some anti freeze puddles in the mornings after nights I've cranked it over/ had it running for short periods of time..nothing leaked out while running and nothing's leaked yet...guess we will see in the morning.
#92
Senior Member
Thread Starter
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Hoping my SYE gets here in time. Got a shipping notice, but it just "initiated". Also says it will be here by wends but I find that hard to believe. Since it's fedex ground... We will see I guess.
#93
Senior Member
Thread Starter
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
got all my parts in and on for now. just didnt happen in time to make it to the blessing. however i did get to stretch her legs a bit today.. First time in over 2 years..il add a few pics later
#94
Senior Member
Thread Starter
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Build at stage 1 is pretty much wrapped up. Now to wheel it and save up for stage 2. Will make sure I take plenty of pics from now on. Sorry about my lack of to this point. Next upgrades will be bigger and more detail. And pics WILL be with them. Here's a few posers from Saturday I took (cell pics) higher quality will be up later have to make a photobucket or hosting site first
#96
Senior Member
Thread Starter
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Lol i know. I just wanted a few snaps. Il go back and go all the way up...maybe lol still need to Bumpstop so I don't cut up that rear tire. And with that locker up front, I was spinning the tires, an sliding more towards the edge of the rock...didn't really want to slam down that hard yet...lol if I break something I want to do it wheeling not just taking some posers. Haha. And it's taller then it looks lol..next time il stand next to/Infront of it.
#98
Senior Member
Thread Starter
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
23. Yourself? And yea it will be nice when I go caged...I plan on cutting the floor out above the boxes, welding the boxes in and then tie the cage to it. Better then just slapping a plate above it...
#99
CF Veteran
Join Date: Apr 2011
Location: Carrollton, GA
Posts: 14,553
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: Inline 6 4.0L High Output
19. I liked Brian's design of using that as a tie in, i'll probably drill through mine from the bottom and see where they end up in relation to the foot plate. If the plate is right over the unibody rail then i will probably just try to make the plate bigger. The brackets are tied into the original shackle bolt and welded to the uniframe rail where they bolt in. It will be interesting to see how it lines up i guess.
#100
Senior Member
Thread Starter
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
19. I liked Brian's design of using that as a tie in, i'll probably drill through mine from the bottom and see where they end up in relation to the foot plate. If the plate is right over the unibody rail then i will probably just try to make the plate bigger. The brackets are tied into the original shackle bolt and welded to the uniframe rail where they bolt in. It will be interesting to see how it lines up i guess.
#103
Senior Member
Thread Starter
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Nice I was looking at that one, swracecars, and EORs kit. 100% going DOM, and like you said well need a few extra sticks to brace/triangulate everything.
#105
Senior Member
Thread Starter
Join Date: Mar 2012
Location: grand rapids
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
So figured id recap what's done. Since I didn't do full/updates about everything and don't have many pics. These past two weeks I was rushing trying to get it done for the blessing of the jeeps, and didn't make it...just hours short of the deadline.
Floor pan replacement
33s on street locks
2x6 mini boatsides/rockers - not braced yet.
Doors removable and trimmed to fit with the mini boat sides, Trimmed about 1 1/2 off.
Cut and fold rears. front fenders cut
HD offroad Shackle relocation brackets
HD full frame stiffener kit
Patched rot in rear uni rails
Clayton long arms - also gave the front ~1" stretch
Cut off LCA mounts
JCR steering box spacer
Ruffstuff x-over steering 3/4 kit went UTK
Over axle track bar using ruffstuff brackets and heims
D30 mini truss, control arm skids, boxed upper CA mount
D30 lockrite
New ball joints
New u joints
New wheel cylinders, shoes, calipers, pads, Hardlines, and GMC front extend soft lines, Wrongler extended rear soft line
True ABS delete - didn't plan on having to do this one, but pump had air in it could not get good brakes back.
IRO hack and tap SYE, Xj front shaft
A/C delete
Few random sensors
That pretty much sums it up that I can think of off hand.
Things to do over spring/summer:
Bumpers & recovery
Header and full exhaust - cranked mani and random leaks
Valve cover, oil adapter O-ring, oil pan gaskets - hoping to avoid rear main, but will get done if need be.
Freeze plugs - preventative
Cowl snorkel
Seal and bedline interior
Gut the dash, engine bay and wire harness of stuff not being/not going to be used
Dual e-fan conversion
Wheel this **** out off it.
Lift and put MOABs on my WK. Lol non related but figured I'd throw it in.
Save up for stage 2. - will be released at later date.
Floor pan replacement
33s on street locks
2x6 mini boatsides/rockers - not braced yet.
Doors removable and trimmed to fit with the mini boat sides, Trimmed about 1 1/2 off.
Cut and fold rears. front fenders cut
HD offroad Shackle relocation brackets
HD full frame stiffener kit
Patched rot in rear uni rails
Clayton long arms - also gave the front ~1" stretch
Cut off LCA mounts
JCR steering box spacer
Ruffstuff x-over steering 3/4 kit went UTK
Over axle track bar using ruffstuff brackets and heims
D30 mini truss, control arm skids, boxed upper CA mount
D30 lockrite
New ball joints
New u joints
New wheel cylinders, shoes, calipers, pads, Hardlines, and GMC front extend soft lines, Wrongler extended rear soft line
True ABS delete - didn't plan on having to do this one, but pump had air in it could not get good brakes back.
IRO hack and tap SYE, Xj front shaft
A/C delete
Few random sensors
That pretty much sums it up that I can think of off hand.
Things to do over spring/summer:
Bumpers & recovery
Header and full exhaust - cranked mani and random leaks
Valve cover, oil adapter O-ring, oil pan gaskets - hoping to avoid rear main, but will get done if need be.
Freeze plugs - preventative
Cowl snorkel
Seal and bedline interior
Gut the dash, engine bay and wire harness of stuff not being/not going to be used
Dual e-fan conversion
Wheel this **** out off it.
Lift and put MOABs on my WK. Lol non related but figured I'd throw it in.
Save up for stage 2. - will be released at later date.