|
Project "My wife doesn't give a ****"
So holy crap here we go, I don't know what happened but the jeep gods have graced me with their presence and presented me with my new baby from their bosom. I have wanted a Jeep Cherokee since i can remember, well that and a Ford F150.
https://cimg9.ibsrv.net/gimg/www.che...79508214a9.jpg 07 Ford F150 4.6L. 2in leveling kit. 33in nitto graplers. Other stupid things. My best friend Marley a Labrador Retriever. https://cimg1.ibsrv.net/gimg/www.che...70053e5c92.jpg So back to the sweet sweet nector from the jeep gods fat bosom. (Ps I am in the army so Im watching my toungue on here but if one person tells me to go for it I will because thats how i am. Fat bosom is not what I wanted to say) Id been looking on craigslist for awhile now and found a 2000 cherokee with amazing records and everything I was looking for. So my wife, the kids and I drove down to Nashville and the cum stain blew us off. So we stopped at Oprey Mall and I was on craigslist trying to save the day and found a 88 Cherokee with 247,XXX and i was ehhhh okay. He was asking 1500 for it yet it ran and drove, so we went to look at the pos. We show up and start looking and out of no where BAM!!! ATF starts flowing from what at the time seemed like its *** because of the amount. Hold on to your seats it was the bellhousing. I looked at chief and chief looked at me and I stated well it ain't 1500 no more. He says he'll take 800 and I state can you get it to my house. He says deal and a week later its here today. Lets looks at pictures and get a chub why dont we. https://cimg9.ibsrv.net/gimg/www.che...5fa71b0d16.jpg https://cimg0.ibsrv.net/gimg/www.che...5b28736184.jpg https://cimg2.ibsrv.net/gimg/www.che...b265725609.jpg https://cimg6.ibsrv.net/gimg/www.che...a5a14c2a5c.jpg https://cimg7.ibsrv.net/gimg/www.che...caf488fc28.jpg https://cimg2.ibsrv.net/gimg/www.che...8d63f341cb.jpg https://cimg3.ibsrv.net/gimg/www.che...7d3f367abf.jpg https://cimg4.ibsrv.net/gimg/www.che...2ada927ac7.jpg https://cimg5.ibsrv.net/gimg/www.che...008d89074c.jpg https://cimg7.ibsrv.net/gimg/www.che...d4f2cc4c77.jpg https://cimg0.ibsrv.net/gimg/www.che...89e9362312.jpg So the jeep arrived tonight and I had to start working on it of course :shifty:. I found everything from a marble counter to spit bottles and $5 in change :gun_bandana::gun_bandana: hell yea Im going ape **** by this point. So far heres what I can tell you I love the look of older cherokees so this is great but it has its problems. The BAD :devil2: Trans fluid coming out of bell housing Random *** rust/paint doing weird voodoo **** stupid decals (already removed) Windows and locks work about as well as telling your 99yr old granny to run 2mi window tint is shot tires are shot fluid bottles under hood involve zipties floor pans have holes exaust has holes thats about it i think............. The GOOD 2.5in lift (rustys offroad stickers on rear window? ill look tomorrow for inden) 31in tires without cut fenders IT RUNSSSSSSS Thats all for now I will update tomorrow beings that my wife is on 24 ops during my 3 day weekend. So just me and the kids...... |
So just a little update from yesterday. Wife is still at work so the kids and I went to run a bunch of different errands. We stopped off at autozone and bought a ton of parts. Im going to do a complete fluid exchange. I got coolant for a flush, oil change, all 3 seals for the leak coming from the bellhousing (pump seal, input shaft seal, torque converter seal), transmission fluid, diff seals front and rear, gear oil, trans pan gasket, trans filter, wheel cylinder (drivers side rear is leaking). I also forgot to mention this last night but the jeep also came with no keys what so ever. I bought a new ignition cylinder and 4 lock door cylinders (guess i have one extra just in case). Also yes it does start with no keys lol.
https://cimg0.ibsrv.net/gimg/www.che...016cf6645a.jpg Pcv valve is a piece of junk to so ill be replacing that. Also Ive got a crap ton of wiring to go through from amp chords to a ***** show of baja lights and a electric fan. https://cimg1.ibsrv.net/gimg/www.che...8391e0ffc2.jpg Seats are shot due to the fact they wont recline forward but ill deal with that later. Also the head unit and speakers are junk ( What'd this guy do buy and put together a half ***** system? lol https://cimg2.ibsrv.net/gimg/www.che...63fe66e794.jpg https://cimg7.ibsrv.net/gimg/www.che...b7fb6ad2b9.jpg Also picked up a floor jack, trans jack(due to the fact if this seal fix doesnt work I best just have one). Hood light also. And yes i went to harbor freight so shoot me I suppose. https://cimg4.ibsrv.net/gimg/www.che...81587b4413.jpg The grand total for all of this was $214. SCORE in my opinion! Cheaper than i was expecting. |
Great deal...hope you get the trans deal fixed...
I shop harbor freight non stop....great tools!!! From my experience. |
While you're under the hood. Do yourself a favor and remove the C101 connector on the driver's side firewall. It connects all the sensors to the ecu and after 28 years the electric grease they used has turned to tar and resists a good connection. Just clip and solder one wire at a time. It made a significant difference with mine and one less headache. Cruiser54's tips are like the Renix's Bible when it comes to troubleshooting. Looks like it's been converted to an open cooling system, that can be a plus depending on how you look at it.
|
|
Jeep meme??
Originally Posted by Cane
(Post 3219292)
I alsmost lost it when I saw this face. nice dog you have there, and XJ for that matter! older body style all the way!
|
Originally Posted by 88whitecomanche
(Post 3219267)
Great deal...hope you get the trans deal fixed...
I shop harbor freight non stop....great tools!!! From my experience. |
Originally Posted by LasVegastwo
(Post 3219331)
Dog: We had a good run, you and I...:(
|
Originally Posted by unidentifiedbomb
(Post 3219277)
While you're under the hood. Do yourself a favor and remove the C101 connector on the driver's side firewall. It connects all the sensors to the ecu and after 28 years the electric grease they used has turned to tar and resists a good connection. Just clip and solder one wire at a time. It made a significant difference with mine and one less headache. Cruiser54's tips are like the Renix's Bible when it comes to troubleshooting. Looks like it's been converted to an open cooling system, that can be a plus depending on how you look at it.
|
Originally Posted by SHILKEY
(Post 3219361)
Ill look into that down the road boss but i do agree and appreciate the help. Now help me out a bit here though what is an open cooling opposed to a "closed cooling" system? |
Originally Posted by unidentifiedbomb
(Post 3219368)
Closed system has no rad cap. Just a resovour bottle where your current overflow bottle is. Its easier to work on an open system but a good system will run cold either open or closed.
|
As in a maintained system will keep the engine steady between 200-210 degrees on the XJ 4.0.
|
Originally Posted by unidentifiedbomb
(Post 3220114)
As in a maintained system will keep the engine steady between 200-210 degrees on the XJ 4.0.
|
So just when there was hope all was lost. We finished pulling the trans out sunday night, and I then took it to my transmission guy (O yea I got a transmission guy lol joking). I called up A&H Transmission and they said they'd look at it for free, so Id have to be an idiot to atleast just get it looked at. The instant the guy see's it he says its trashed. Now when we dropped the trans we could see the input shaft seal was blown but wait there's MORE! The input bearing welded itself to the torque converter and shredded the teeth on the in put shaft. So I'll be taking all my parts back trans wise and start looking for another.
https://cimg1.ibsrv.net/gimg/www.che...43d13680b1.jpg https://cimg2.ibsrv.net/gimg/www.che...367b0fe406.jpg Can anybody help me determine which front axle I have. I torn between the Dana 30 and the AMC 35 https://cimg3.ibsrv.net/gimg/www.che...b3c3d64ba9.jpg Trans finally out, I still had hope here....... https://cimg4.ibsrv.net/gimg/www.che...2f3a777a60.jpg Garage is trashed better get some kitty litter. https://cimg6.ibsrv.net/gimg/www.che...8348b5d876.jpg Input seal blown, hope still exists. https://cimg7.ibsrv.net/gimg/www.che...fe3acaf09d.jpg Cover plate blown out. https://cimg8.ibsrv.net/gimg/www.che...5c4a0c66a7.jpg Pulled the rear diff cover last night after the news about the trans. https://cimg9.ibsrv.net/gimg/www.che...688c0ac63c.jpg Diff fluid looks like mud. https://cimg0.ibsrv.net/gimg/www.che...8fc7819a0d.jpg Gear teeth look clean and no big metal pieces floating around. https://cimg2.ibsrv.net/gimg/www.che...4335586c82.jpg Im also torn on this one too. No tags on either one. I believe this is either a 8.25 or also an AMC 35? |
All 4wd Cherokees came with D30s up front. Looks like someone swapped an c8.25 in the rear as they were not an option in the '80s. c8.25s came in 27 and 29 splines. Without knowing what year the axle is the only way to find out would be to count the splines yourself.
|
| All times are GMT -5. The time now is 10:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands