Project grey xj
#17
Member
Thread Starter
Join Date: May 2010
Location: Port Coquitlam
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
Got some work done today trimmed up my bumper and beat it back into shape a little bit. Then i flexed it out a bit got one wheel in the air!!! WOHOO!!
#18
Member
Thread Starter
Join Date: May 2010
Location: Port Coquitlam
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
Got bored today so i decided to mount up sum chepo lights i had lying around. Need to wire them but its too cold outside guess ill wait till it warms up outside
#19
Member
Thread Starter
Join Date: May 2010
Location: Port Coquitlam
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
Got some work done today. Fresh oil, wired up the lights and put a hotter thermostat in for winter (heater sucked with the old one). Oh and I also put this sticker on for my passangers
#21
Member
Thread Starter
Join Date: May 2010
Location: Port Coquitlam
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
The rear is out left the front on for this pic cant flex it out too far cuz the front brake lines are too short fer the lift. Should be getting sum new ones soon. I do have quick discos for the front tho.
#22
CF Veteran
Join Date: Mar 2011
Location: Tampa Fl
Posts: 1,751
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 HO
Hmmm... Maby its because the front was still connected. It just seams like the rear should flex more than that. Is your shackle on left side hitting the body or somthing? This is mine with a 3" lift. I can still go higher but i gota bumpstop first. Rear tires were still planted firm on the ground.
#25
Member
Thread Starter
Join Date: May 2010
Location: Port Coquitlam
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
idk mabe steel braided but idk I talked to a local shop where I live and they said they can get some stock lines lengthend for half the price so I might just do that.
#26
Member
Thread Starter
Join Date: May 2010
Location: Port Coquitlam
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
ok did sum wrenching and its pissin me off. my coolent is pissing everywhere and i dont know where from, and my heater stoped working. well it works but i cant change where the air comes from i can only get hot air from the widshield i cant put it at my feet or heat so its hard to warm it up inside anyone know how to fix that? Also does anybody know what these do?
#28
Seasoned Member
Join Date: Sep 2010
Location: Owosso, MI
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
well the pic with the vacuum line is what controls the modes in the HVAC box so if you hook that up to engine vacuum you should be able to change where it comes out again
#29
Member
Thread Starter
Join Date: May 2010
Location: Port Coquitlam
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
Yah turns out when moved the vacume ball out of the bumper I snaped the plastic line so i fixed that and it worked.
#30
Member
Thread Starter
Join Date: May 2010
Location: Port Coquitlam
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
Gettin a shop to do sum work today sux but i cant do an alighment. Also my front ujoint went so im getting that done too. Id do it myself but i dont have the tools and ive got a big road trip commin up. Best part is the guy workin on it has a passion fer jeeps so im gettin a new wheelin buddy