project "fade to black"
#18
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
out with the old
in with the new.
started rear bumper
one pass, flux core, no chipping.
3/4'' shackle tabs
in with the new.
started rear bumper
one pass, flux core, no chipping.
3/4'' shackle tabs
#21
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
ok so, i jumped the gun on the last parts rig and ended up with a low pinion front diff and a trans i couldnt use. saturday i ran into a guy in a lifted YJ at the gas station, ended up buying a XJ from him
93, 4.0L, AX15, np231. i will be making mine stick as well as taking the front HP 30. only paid 250 for the jeep.
93, 4.0L, AX15, np231. i will be making mine stick as well as taking the front HP 30. only paid 250 for the jeep.
#22
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
we'll did the 4x4 and ax15 swap this weekend. started saturday morning, by saturday night all i had left was to mount the master and make the clutch line. i used a 87-90 YJ master, in order to do this i had to extreamly modify how the clutch pedal mounts. i got it to shift just before work but havnt taken it for the test drive yet, but overall im very excited and glad my jeeps finally a 4x4!!
#23
Junior Member
Thread Starter
Join Date: Dec 2011
Location: ontario Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0L
so.
old 2 wheel drive drivetrain
parts for swap
new ujoints, fluids, clutch kit, machined flywheel, new clutch master..
mounting master
master and clutch line (87-90 YJ master)
it drives great, no vibs. however 5th and reverse are a little winey.. i havnt put the interior back in yet, going to do some floor and finish my frame stiffeners first.
old 2 wheel drive drivetrain
parts for swap
new ujoints, fluids, clutch kit, machined flywheel, new clutch master..
mounting master
master and clutch line (87-90 YJ master)
it drives great, no vibs. however 5th and reverse are a little winey.. i havnt put the interior back in yet, going to do some floor and finish my frame stiffeners first.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Cane
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
23
12-11-2015 11:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)